getting ready to start recording
INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED)
1
2
To insert a memory card
To eject a memory card
1.Pull the battery cover in the direction of the arrow as shown in the figure to open.
2.Insert the memory card into the card slot until it softly clicks.
•Make sure that the terminal portion is facing down and the camcorder is placed as shown in the figure.
3.Close the battery cover.
1.Pull the battery cover in the direction of the arrow as shown in the figure to open.
2.Gently push the memory card to eject it.
3.Close the battery cover.
•To avoid the data loss, turn off the camcorder by pressing the Power ( 
) button before inserting or ejecting the memory card.
•Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your camcorder supports only micro SD (micro Secure Digital) and micro SDHC (micro Secure Digital
High Capacity) cards. The compatibility with the camcorder may vary depending on the manufacturer 27 and the type of memory card. ¬page 28