Samsung SC-D365, SC-D363 manual Set the Power switch to Camera or Player

ENGLISH

Basic Recording

Searching a quickly for a desired scene (Setting the ZERO MEMORY) (SC-D364/D366 only)

✤The ZERO MEMORY function works in both <Camera> and <Player> modes. ➥page 19

✤You can mark a point on a tape that you want to return to following playback.

1.	Set the [Power] switch to [CAMERA] or [PLAYER].		1
2.	Set the [Mode] switch to [TAPE].
3.	Press the [ZERO MEMORY] button on the remote control before the recording or during
	playback at the point where you wish to return.
	■	The time code is changed to a tape counter that is set to ZERO MEMORY with the
		< 0:00:00> (ZERO MEMORY indicator).
	■	If you want to cancel the ZERO MEMORY function, press the [ZERO MEMORY] button
		again.
4.	Finding the zero position.
	■	When you have finished playback, fast forward or rewind the tape in stop mode.	œ
		The tape stops automatically when it reaches the zero position.

■When you have finished recording, set the [Power] switch to [PLAYER] and press the [œœ (REW)] button.

The tape stops automatically when it reaches the zero position.

5.The tape counter with the < > (ZERO MEMORY indicator) disappears from the display and the tape counter is changed to the time code.

[ Notes ]

■In the following situations, ZERO MEMORY mode may be canceled automatically:

-At the end of the section marked with the ZERO MEMORY function.

-When the tape is ejected.

-When you remove the Battery Pack or power supply.

■The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.

37