Samsung SC-D363, SC-D365 manual Setting the File Number

ENGLISH

Digital Still Camera Mode (SC-D363/D364/D365/D366 only)

Setting the File Number

✤File Number setting works only in <M.Cam> mode. ➥page 19

✤File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.

✤File numbers may be set as follows:

-<Series> : When there are existing files, the new image will be named as the next number in the sequence.

-<Reset> : When there are no files stored on the Memory Card, the file numbering starts from 0001.

1. Set the [Power] switch to the [CAMERA].

4

2.	Set the [Mode] switch to [MEMORY].
3.	Press the [MENU] button.
	■ The menu list will appear.

M.Cam Mode

√Memory Memory Type

Photo Quality

File No.

√Memory Card √Super Fine √Series

4. Move the [Zoom] lever up or down to select <Memory>, then press the [OK] button.

5. Move the [Zoom] lever up or down to select <File No.>, then press the [OK] button. 6

6.Move the [Zoom] lever up or down to select desired option (Series or Reset), then press the [OK] button.

7.To exit, press the [MENU] button.

ZOOM Move OK Select MENU Exit

M.Cam Mode

Back

Memory Type

Photo Quality

File No.	Series
	Reset

ZOOM Move OK Select MENU Exit

72