recording
Basic procedures to record movie images described below.
RECORDING MOVIE IMAGES
•Memory camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the Recording start/ stop button that works best for you.
1.Turn the memory camcorder on.
•Connect a power source to the memory camcorder. ➥pages 12,18 (A battery pack or an AC power adapter)
•Slide the POWER switch downward to turn on the power. ➥page 21
•Set the appropriate storage media : Internal Memory or Memory Card.
(If you want to record on a memory card, insert the memory card.)
2.Check the subject on the LCD screen.
3.Press the Recording start/stop button.
•The recording indicator ( 
) will display and recording will start.
•Pressing the Recording start/stop button again during recording will set the memory camcorder to recording pause mode.
4.When recording is fi nished, turn the memory camcorder off.
•Setting the display option of "16:9 Wide" does not imply wide angle (wide aspect ratio) recording. Camera output, recording and playback signal is formatted to 4:3 aspect ratio.
•Please note that all movies recorded with this memory camcorder have 4:3 aspect ratio regardless of the display option (16:9 Wide/4:3). When it is set to "16:9 Wide", the displayed picture may appear wider or rougher than that of 4:3 screen aspect ratio. ➥pages 55,61
00:00:00/00:58:00
Recording...
STBY 00:00:30/00:57:30
120 MIN
120 MIN