troubleshooting
✪If you encounter any problem using your camcorder, check the following before requesting service. If these instructions do not solve your problem, contact the nearest Samsung authorized service center.
Symptoms and solutions
Power
Symptom | Explanation/Solution | |
|
| |
| • The battery pack may not be installed on your memory camcorder. Insert a | |
| battery pack to the memory camcorder. | |
The power does not turn on. | • The inserted battery pack may be discharged. Charge the battery pack or | |
replace it with a charged one. | ||
| ||
| • If you use an AC power adaptor, make sure it is properly connected to the | |
| wall outlet. | |
|
| |
| • Your memory camcorder has been left for more than 5 minutes without any | |
| button operation. To turn on your memory camcorder, press the Record | |
| start/stop button. | |
| • Is "Auto Power Off" set to "On"? | |
The power automatically turns off. | If no button is pressed for about 5 minutes, the memory camcorder is | |
| automatically turned off ( "Auto Power Off"). To disable this option, | |
| change the setting of "Auto Power Off" to "Off" ➥page 65 | |
| • The battery pack is almost discharged. Charge the battery pack or replace | |
| it with a charged one. | |
|
| |
Power cannot be turned off. | • Remove the battery pack or unplug the AC power adaptor, and connect | |
the power supply to the camcorder again before turning it on. | ||
| ||
|
| |
| • The temperature is too low. | |
The battery pack is quickly | • The battery pack is not fully charged. Charge the battery pack again. | |
discharged. | • The battery pack reached its lifespan and cannot be recharged. | |
| Use another battery pack. | |
|
| |
84_English |
|