Yamaha DSP-AX861SE owner manual Recording, 52 En, 1Turn on all the connected components, Notes

Page 54
Recording

Recording

Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components.

Caution

The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources encoded in DTS, the following considerations and adjustments need to be made. To play DTS-encoded DVDs and CDs (when using a digital audio connection) on your DTS-compatible player, follow its operating instructions to make a setting so that the analog signal will be output from the player.

Notes

•When this unit is set to the standby mode, you cannot record between other components connected to this unit.

•TONE CONTROL (see page 48) and VOLUME settings, the speaker level (see page 66) and the sound field programs (see page 42) do not affect recorded material.

•The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

•Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Likewise, analog signals input at the AUDIO IN jacks are not output at the DIGITAL OUTPUT jack. Therefore, if your source component is connected to provide only digital or analog signals, you can only record digital or analog signals.

•A given input source is not output on the same OUT (REC) channel.

•S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing video signals input from a video source component that provides only an S-video or a composite video signal, you can only record an S-video or a composite video signal on your VCR.

•The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.

•Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

y

Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

1Turn on all the connected components.

2Rotate the 0INPUT selector (or press one of the input selector buttons (B)) to select

the source component you want to record from.

3Start playback on the selected source component or select a broadcast station.

4Start recording on the recording component.

52 En

Page 53 Page 55
Image 54
Page 53 Page 55
Contents DSP-AX861SE AV AmplifierOWNER’S MANUAL Caution: Read this before operating your unit For U.K. customersSpecial Instructions for U.K. Model Contents 1 Enat the end of this manual Notice 2 EnAbout this manual Built-in 7-channelpower amplifier FeaturesSupplied accessories Other features4 En Installing batteries in the remote control 2 3Getting started 2Insert the four supplied batteriesPreparation: Check the items Step 1: Set up your speakersQuick start guide Enjoy DVD playback2Connect speaker cables to each speaker 6 En1Place your speakers and subwoofer in the room Front speakers and center speakerdigital coaxial audio output jack of your DVD 7 En1 Connect the digital coaxial audio cable to the player and the DVD DIGITAL INPUT COAXIALP. •Connecting an external amplifier P. •Using the other kind of speaker combinations P.P. •Connecting a set-topbox P. P. •Connecting a Yamaha iPod universal dock P.9 En Using the other SCENE buttons4Rotate 4VOLUME to adjust the volume Check the type of the connected speakersUsing various sound features After using this unitUsing various input sources Adjusting the parameters of this unitConnections Rear panel11 En Front left and right speakers FL and FR Placing speakers12 En Center speaker CConnecting speakers 13 En4Tighten the knob to secure the wire Connecting the speaker cableUsing bi-amplificationconnections 14 EnAudio jacks Information on jacks and cable plugs15 En Video jacksHDMI compatibility with this unit Information on HDMI16 En HDMI jack and cable plugVideo signal flow Audio and video signal flowAudio signal flow 17 EnConnecting a TV monitor or projector 18 En19 En Connecting other componentsConnecting a DVD player Notes20 En Connecting a DVD recorder, PVR or VCRConnecting a set-topbox ConnectionsConnecting audio components 21 EnNotes 1FRONT PRE OUT jacks Connecting an external amplifier22 En 2SURROUND PRE OUT jacksUsing REMOTE OUT jacks Using the VIDEO AUX jacks on the front panelConnecting a Yamaha iPod universal dock 23 En24 En Connecting the power cableAC OUTLET SWITCHED Memory back-up25 En Setting the speaker impedanceTurning this unit on and off Turning on this unit2B Decoder indicators 1A Input signal indicators9 MUTE indicator 3ENHANCER indicatorLFE indicator Using the remote controlLInput channel and speaker indicators Input channel indicators2 Connect the supplied optimizer microphone Using AUTO SETUP28 En to the OPTIMIZER MIC jack on the front5Press Dl / h to select “SETUP” and then •When you use the presence speakers see page•When you do not use the EXTRA SP terminals 6Press Dl/ hto select the desired setting of “EQ”Speaker size SIZE Speaker wiring WIRING30 En Speaker distance DISTANCE31 En the setup result displaysselect “SET” or “CANCEL” 9Press Dl / h repeatedly to toggle betweenIf “WARNING” appears If an error screen appears32 En 3Press DENTER to return to the topDVD Viewing Selecting the SCENE templatesSelecting the desired SCENE template DVD MovieDefault SCENE buttons 34 EnWhich SCENE template would you like to select? Which source do you like to play back?DVD Viewing Preset SCENE templates descriptions35 En DVD Movie ViewingRename the SCENE templates Creating your original SCENE templates36 En 2Set the operation mode selector to LAMP37 En Basic procedurePlayback the desired input sourceSelecting the MULTI CH INPUT component A quick guide to contentsUsing the Zone B feature Selecting the front speaker setcontrol Selecting audio input jacks AUDIO SELECT39 En 1Turn on the video monitor connected to this unit4Press NSET MENU on the remote control Using your headphones2Press Dn repeatedly to select “SIGNAL Muting the audio output41 En Using the sleep timerCanceling the sleep timer Audio informationSelecting sound field programs Sound field indicatorsSound field programs Sound field program descriptionsHiFi DSP 43 EnFor audio music sources NotesFor visual sources of music 44 EnFor various sources Notes45 En For movie sourcesNotes The Compressed Music Enhancer 46 EnStereo playback Virtual CINEMA DSPDeactivating the “STRAIGHT” mode STRAIGHT47 En Press 7STRAIGHT or QSTRAIGHT to select “STRAIGHT”Adjusting the speaker level Using audio featuresAdjusting the tonal quality 2Press Dl / h to adjust the speaker output level Effect.Lvl:MID Enjoying multi-channelsources in 2-channelstereo Selecting the night listening mode 49 En50 En Using iPodControlling iPod Controlling iPod in the simple remote mode1Set the operation mode selector to 51 EnThe function of the play information display playback of the selected song1Turn on all the connected components Recording52 En the source component you want to record fromadjust Advanced sound configurationssettings Changing sound field parameterIncrease the value of “DSP LEVEL” when Basic configuration of sound field programs54 En Decrease the value of “DSP LEVEL” when55 En INIT.DLY P.INIT.DLY S.INIT.DLY SB INI.DLY56 En ROOM SIZE P.ROOM SIZE S.ROOM SIZE SB ROOM SIZELIVENESS S.LIVENESS SB LIVENESS REV.DELAY 57 EnREV.TIME REV.LEVELSelecting decoders used with sound Selecting decoders58 En field programs Decoder TypeSURROUND DECODE 59 EnDecoder descriptions SURROUND DECODE60 En Decoder parameter descriptionsManual setup MANUAL SETUP Customizing this unit MANUAL SETUPAuto setup AUTO SETUP 61 EnSignal information SIGNAL INFO 62 Ensettings 6Press NSET MENU to exit from “SET MENU” Using SET MENUSETUP” 63 EnWhen you do not use the EXTRA SP terminals Speaker settings ASPEAKER SETWhen you use the presence speakers see page FRONT B speakers setting FRONT BWhen the center speaker is large When the front speakers are largeWhen the front speakers are small When the center speaker is small66 En When you do not use a subwooferSubwoofer phase SUBWOOFER PHASE LFE/Bass out LFE/BASS OUTUnit UNIT 67 EnSpeaker distance CSP DISTANCE Speaker distancesLow-frequencyeffect level Audio settings GAUDIO SET68 En Center graphic equalizer CENTER GEQInitial volume INI.VOL HDMI setting HHDMI SETMaximum volume MAX VOL 69 EnInput/output assignment 2 INPUT MENU70 En For COMPONENT VIDEO jacks A, B and CFor OPTICAL OUTPUT jack 5Press DENTER on the remote control to exit71 En For OPTICAL INPUT jacks 2, 3 and72 En Multi channel input settingsDTS decoder prioritize setting Decoder select mode73 En Display settings ADISPLAY SET3 OPTION MENU Video conversion VIDEO CONVHDMI aspect ratio HDMI ASP Source feature OSD display time74 En Dimmer DIMMERParameter initialization DPARAM.INI iPod universal dock setting EDOCK SET75 En Charge on standby STANDBY CHARGEremote control Remote control featuresUsing the remote control for the SCENE feature 76 EnControlling this unit Controlling this unit, a TV, or other components77 En Controlling a TV78 En Controlling other componentsyou want to set up Setting remote control codesRemote control code default settings 79 En3Press DENTER 6Press TLEARN again to exit from the setup mode80 En 5Press DENTER to set the number1 Set the operation mode selector to Programming codes from other remote controls81 En LSOURCE and then press an input selector82 En the remote controlChanging source names in the display window 5Press and hold the button you want toMACRO operations Macro programming features83 En 3Press Dk / n to select and enter a characterDefault macro functions 84 En85 En 4 Press TMACRO again using a ballpoint penor similar object when the operation 3 Press the buttons for the functions you want86 En Clearing configurationsusing a ballpoint pen or similar object Clearing function setscontaining the function you want to clear 87 EnClearing a learned function TLEARN again to exita ballpoint pen or similar object 88 EnClearing a macro function Notes89 En Advanced setupUsing the advanced setup unitSetting remote control AMP ID codes User presets PRESETRemote control AMP ID REMOTE AMP 90 EnVideo parameter reset V.RESET SCENE IR code setting SCENE IRBi-amplifiersetting BI-AMP Remote control AMP ID codesGeneral Troubleshooting92 En after the power issettings are not 93 Enspeakers when the pageThe volume level is 94 Enor DTS indicator in The volume level“CHECK SP WIRES” Remote control95 En The remote control96 En AUTO SETUPBefore AUTO SETUP HDMI97 En During AUTO SETUPAfter AUTO SETUP Notes4Press 5TONE CONTROL repeatedly to select “RESET” Resetting the system3Rotate the 6PROGRAM selector to select “PRESET” 98 EnGlossary Component video signalComposite video signal 99 EnDTS 96/24 S-videosignal100 En DTS Digital SurroundElements of a sound field Sound field program information101 En CINEMA DSPFrequency Parametric equalizer information102 En GainAUDIO SECTION Specifications103 En VIDEO SECTIONIndex 104 EnNumerics 105 En 106 En Front panel 5 6 7 8 9 0 ARemote control CD PLAYER List of remote control codesCABLE CD RECORDERRECEIVER TUNER LD PLAYERMD RECORDER SATELLITE TUNERAMERICA ACTION Page HUGHES NETWORK SYSTEMS DSP-AX861SE/DSP-AX761 5 6 7 8 9 0 AVOLUME Front panel
Top Page Image Contents