! | Set up your digital frame |
700T can be used by connecting to a PC via the USB cable (along with the auxiliary power cable).
However, it may not operate properly if the power supply in your PC is unstable. In this case, connect the power adapter.
USB Cable
Auxiliary power |
cable |
Screw the digital frame stand until it is fixed
completely to the frame.
7 English
Using the Digital Frame
Viewing pictures | memory device can be viewed in a wide range of options. Only | |
| Pictures saved in the product’s internal memory or an external | |
| an SD memory card or USB memory device can be used as an | |
| external memory device. Refer to the following page for menu | |
| options. |
|
Press [ ]. | Use [▲,▼,◄,►] to | A slide show begins from |
| move to the picture you | the picture you selected. |
want and press [
].
If you press the [
] button during a slide show, the <Home>, <Rotate>, <Zoom> and <Settings> menus will appear.
•To use <Rotate>, <View Mode> must be set as <Photo Only>, <Photo & Clock> or <Photo & Calendar>.
•To use <Zoom>, <View Mode> must be set as <Photo Only> or <Photo & Clock>.
Using as a Mini Monitor
Connect the digital frame to a PC with the USB cable to use as a Mini Monitor.
Connect the digital frame to a PC with the USB cable to use as a Mini Monitor (aux. monitor). You must install Frame Manager on your
PC in order to use the product as a Mini Monitor.
Log on to http://samsung.com/ to download Frame Manager and for instructions on using the product as a Mini Monitor.
Only one auxiliary monitor can be used at a time.
*The buttons on the digital photo frame are disabled (in Mass Storage or Mini Monitor mode) when connected to a PC.
!PC requirements for use as a
Mini Monitor
•OS: Windows XP SP2, Vista
•USB: Extended Host Controller(EHCT)
USB 2.0 supported
•RAM: 256MB or higher
•CPU: 2.4GHz or higher