010COV.book Page 16 Tuesday, August 17, 2010 2:37 PM
Let’s view an image
PNote
When using a memory card of the following types, make sure to insert it in an appropriate adaptor.
If you insert it without an adaptor, you may be unable to remove it. As shown in the
1miniSD /miniSDHC
1miniSD/ miniSDHC adaptor
2microSD/microSDHC
2microSD/ microSDHC adaptor
3“Memory Stick Micro”
“M2” adaptor (standard size)
3
“M2” adaptor (Duo size)
Inserting a memory card
1 Open the I/O cover.
2 Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame).
Access lamp
SD memory Card (Slot A)
“Memory Stick”
(Slot A)
“Memory Stick Duo”
(Slot B)
zTip
•S-Frame fails to auto rotate if:
–An image file has been shot with a DSC which doesn’t support Exif rotate tag recording.
–An image file is retouched and saved with retouching software which breaks the Exif rotate tag.
I/O cover
When you insert a memory card
The images on the memory card are automatically displayed.
If you switch off the power while they are being displayed
If you switch the power back on, the same images continue to be displayed.
If the access lamp does not flash
Reinsert the memory card after checking the label side of the memory card.
About the A and B slots
If you insert memory cards both into the A and B slots simultaneously, the photo frame will not work properly.