MOTION DET
In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected, it sets off the Alarm signal of the Controller.
ZOOM SPEED
In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide).
Use the [Left] or [Right] keys in the ZOOM SPEED menu to select the speed.
1 : Magnification x 22 takes about 18 seconds. Slowest speed
| (CAMERA SET) |
|
| |
|
|
| ||
| CAMERA ID | OFF |
| |
| INT |
| ||
| COLOR/BW | COLOR |
| |
|
|
| ON... |
|
| MOTION DET |
| ||
| ZOOM SPEED | 3 |
| |
| DIGITAL ZOOM | OFF |
| |
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
➜
Press [Enter]
(MOTION DET)
AREAPRESET...
SENSITIVITY L
2 : Magnification x 22 takes about 10 seconds. Low speed
3 : Magnification x 22 takes about 6 seconds. High speed
4 : Magnification x 22 takes about 4 seconds. Fastest speed
DIGITAL ZOOM
E
Select ON and press [ENTER] and the MOTION DET additional menu will appear. The AREA menu, selecting the screen area where the MOTION detection function will be applied may be selected by PRESET or USER. Set AREA to PRESET and the MOTION detection function will be applied to the factory default part.
You may set up the digital zoom magnification ratio in the DIGITAL ZOOM menu. The magnification ratio ranges from OFF to 10. If you set Digital Zoom of
If you set the AREA menu to USER and press [ENTER], you may vary the size and position of the area where you want to apply the MOTION detection function by yourself. Press Left, Right, Up, or Down to select an area size. Press ENTER and then Left, Right, Up, or Down to select a position. Press ENTER again to move back to the upper menu.
Use [ENTER] and Left, Right, Up, or Down to move and scale the MOTION detection area.
Press [ENTER] again and you will escape the AREA setup menu.
Use SENSITIVITY to set up the sensitivity of MOTION detection strength. The higher, the more sensitive.
|
| (CAMERA SET) |
|
|
|
|
|
| |
|
| CAMERA ID | OFF |
|
|
| INT |
| |
|
| COLOR/BW | BW... |
|
|
| MOTION DET | OFF |
|
|
| ZOOM SPEED | 3 |
|
|
| DIGITAL ZOOM | OFF |
|
|
| EXIT | QUIT |
|
|
|
|
|
|
|
|
|
|
|
|
| (CAMERA SET) |
|
|
|
|
|
| |
|
| CAMERA ID | OFF |
|
|
| INT |
| |
|
| COLOR/BW | BW... |
|
|
| MOTION DET | OFF |
|
|
| ZOOM SPEED | 3 |
|
|
| DIGITAL ZOOM | X10 |
|
|
| EXIT | QUIT |
|
|
|
|
|
|
|
|
|
|
|
EXIT
SIZE
SIZE
The EXIT menu is used to quit the CAMERA SET menu of the
➜
Use the [Left,
Right, Up, Down]
Keys
POSITION | POSITION |
|
After PAN/TILT movement finishes, MOTION DET function will not work for about 5 seconds to stablize the chage of the screen.
- QUIT | : Ignores the changed information and restores the saved |
| information. |
- SAVE | : Saves the information of the setting condition of the menu. |
-PRESET : Ignores the changed information and restores the initial factory defaults of the menu.