Philips MCD702, MCD700 manual Connections, Connecting the speakers, English

Connections

Speaker

(right)

English

Speaker

(left)

FM AM antenna antenna

AC power cord

IMPORTANT!

–The type plate is located at the bottom of the system.

–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.

–Never make or change any connections with the power switched on.

Connecting the speakers

Connect the speakers to the SPEAKERS (8Ω) terminals with two speaker cables. Right speaker to “R” and left speaker to “L”, red wire to “+” and silver wire to “-”. Fully insert the stripped portion of the speaker wire into the terminal as shown.

1	2
For MCD700
1	2
	For MCD702

Notes:

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

–For optimal sound performance, use the supplied speakers.

–Do not connect more than one speaker to any one pair of +/- speaker jacks.

–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

11