Sony SIR-4160 manual Troubleshooting, Specifications, Check the setting of White BAL Setup menu

Page 17

Troubleshooting

If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from.

Nothing appears on the screen.

Check that the power cord and line connection between the camera and monitor are fixed properly.

Check that you have properly connected UTP cable or BNC cable to the camera.

The image on the screen is dim.

Is lens stained with dirt? Clean your lens with soft, clean cloth.

Set the monitor to proper condition.

If the camera is exposed to too strong light, change the camera position.

The image on the screen is dark.

Adjust the contrast feature of the monitor.

If you have an intermediate device, set the 75Ω / Hi-z properly.

The camera is not working properly, and the surface of the camera is hot.

Check that you have properly connected the camera to an appropriate power source.

The SENS-UP function does not work.

Check that AGC of EXPOSURE SETUP menu is ‘OFF’.

Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.

The Motion Detection function does not work.

Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.

Color is not correct.

Check the setting of WHITE BAL SETUP menu.

The screen flickers continually.

Check that direction of camera turns toward the Sun.

When coaxial communication is not available:

Make sure that the camera and monitor are installed within the recommended distance.

Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.

IR-LED isn’t lighted.

Isn’t DAYNIGHT function setting up the color mode?

Please change the AUTO or B/W mode.

The camera is not waterproof.

Please check the Front Cover and Main Body by the following Guide Label.

 

Specifications

 

 

 

 

 

SIR-4160N

 

SIR-4160P

ELECTRICAL

 

 

 

Input Voltage

DC 12V ± 10% / AC 24V ± 10%

 

Power Consumption

Max 6.8W / 6.5W (IR-LED ON)

 

VIDEO

 

 

 

Imaging Device

1/3 inch, Diagonal 6mm Super HAD CCD

 

Total Pixels

811(H) x 508(V)

 

795(H) x 596(V)

Effective Pixels

768(H) x 494(V)

 

752(H) x 582(V)

Scanning System

2:1 Interlace

 

Synchronization

Internal /Line-Lock

 

Frequency

H : 15.734KHz V:59.94Hz

 

H: 15.625KHz V: 50.00Hz

Horizontal Resolution

COLOR : 600TVL, B/W : 700TVL

 

Min. Illumination

LED ON : 0Lux

 

LED OFF : 0.15Lux (Color, F1.2), 0.0003Lux (Color,SENS-UP x512)

 

Visibility distanse(IR LED)

50m (32EA)

 

S/N (Y Signal)

52dB (Weight On, AGC Off)

 

Video Output

CVBS : 1.0Vp-p, 75Ω composite

 

LENS

 

 

 

Zoom Ratio

3.6x (Manual)

 

Focus Length

2.8 ~ 10.0mm (F1.2)

 

Angular Field of View

H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)

OPERATIONAL

 

 

 

Electronic Shutter Speed

1/60 ~ 1/120k sec

 

1/50 ~ 1/120k sec

On Screen Display

NTSC : 7 Languages, PAL : 15 Languages

 

SSDR

On / Off (Level adjustable)

 

Backlight Compensation

BLC / HLC / OFF

 

Day & Night

COLOR / B/W / AUTO (ICR)

 

Gain Control

Low / High / Off

 

White Balance

ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)

SENS-UP (frame Integration)

Auto / Off (Selectable x2 ~ x512)

 

Motion Detection

On / Off (8 Programmable zones)

 

Privacy Masking

On / Off (12 Programmable zones)

 

3D Noise Filter (SSNRIII)

On / Off (Level adjustable)

 

Digital Zoom

On / Off (x1 ~ x16)

 

Digital Image Stabilization(DIS)

On / Off

 

Camera Title

On / Off (Displayed 15 Characters)

 

Sharpness

On / Off (Level adjustable)

 

Flip / Mirror

On / Off

 

Communication

Coaxial, RS-485

 

Protocol

Coaxial(Pelco), RS-485(STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC,

BOSCH, HONEYWELL, SEC)

 

 

 

ENVIRONMENTAL

 

 

 

Operating Temperature / Humidity

-10°C ~ +50°C / 30% ~ 80% RH

 

Storage Temperature / Humidity

-20°C ~ +60°C / 20% ~ 90% RH

 

MECHANICAL

 

 

 

Water Resistance

IP66

 

Dimension

Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°)

Weight

1Kg

 

The specification for this product may change without prior notice for product improvement.

COLOR CCD CAMERA 32 User Guide

COLOR CCD CAMERA 33 User Guide

Image 17
Contents English SIR-4160N SIR-4160 SeriesModel Description SIR-4160Features ContentsDo not install under extreme PrecautionsTemperature conditions Environment Do not install under unstableFront Components and AccessoriesOverview Adjust the lenss zoom and focus Adjust to LensBack ❿ RS-485 control terminalConnecting to Power Connecting to MonitorPlease turn off the power when connecting When the resistance value of copper wire is at 20C68FEnable Using Coaxial CommunicationsControl Cable RET PKTMenu Setup Menu ConfigurationOperating Your Camera LensWhite Balance White Bal ExposureATW BacklightIndoor ManualLens Exposure White BAL Enhanced then adjust the levelSSNR3 You can display pictures in color or black and white DAY/NIGHTSpecial →ColorRetrun Image ADJ SpecialZoom OFF WhiteCan enter up to 15 letters Pressing the Function Setup switchExit Set up the mode using the Function Setup witchInitial value of communication adjustment Specifications TroubleshootingCheck that Motion DET of Special Setup menu is ‘OFF’ Check the setting of White BAL Setup menuDimension Sales Network