Sony SIR-4160 manual Exposure, White Balance White Bal

Operating Your Camera

-FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.

Notes

• If color rolling occurs when using a DC lens, set Shutter to Fixed (---).

EXPOSURE

MAIN SETUP
1.LENS	DC
2.EXPOSURE
3.WHITE BAL	ATW

1.When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function

Setup Switch.

2.Select a desired mode using the Function Setup switch.

EXPOSURE SETUP
1.BRIGHTNESS	25
2.SHUTTER	---
3.AGC	HIGH
4.SENS-UP	OFF
5.RETURN

SHUTTER : You can select either auto or manual shutter.

- ---	: Shutter speed is fixed at 1/60sec(1/50sec)
- ESC	: Select this to control the shutter speed automatically. If ESC is selected, the
	shutter speed is automatically controlled depending on the ambient
	illumination of the subject.
- MANUAL : You can control shutter speed manually.
	(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
- A.FLK	: Select this when you see picture flicker, this can happen when the frequency
	of the local lighting clashes with the camera.

Notes

• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.

AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but

the higher the noise.

- OFF : Deactivates the AGC function.

-LOW : Allows automatic gain control from 5.3dB to 32dB.

-HIGH : Allows automatic gain control from 5.3dB to 37dB.

SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated.

- OFF : Deactivates the SENS-UP function.

- AUTO : Activates the SENS-UP function.

RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.

Notes

•If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by increasing or decreasing the shutter speed. (x2 ~ x512)

•Note that the higher the zoom level, the brighter the screen, but the more likely there will be a ghosting effect.

•It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the D-ZOOM level is increased.

White Balance (White Bal)

Use the White Balance function to adjust the screen color.

1.When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’.

2.Select a desired mode using the Function Setup switch.

MAIN SETUP

1.LENSDC 2.EXPOSURE

3.WHITE BAL	ATW
4.SSDR	OFF

COLOR CCD CAMERA 18 User Guide COLOR CCD CAMERA 19 User Guide