Sharp VL-Z5E Demonstration Mode, Watching, Demo Mode on, Cancelling, Demonstration begins

Appendix

Demonstration Mode

Available modes:

Tape Camera, Card Camera

You can watch a brief demonstration of the special camcorder features in Demo mode. If the demonstration appears on the screen when you turn on the camcorder for the first time, cancel the Demo mode to use your camcorder.

Watching

•The example screens shown are for Tape Camera mode.

1 Remove the Mini DV cassette from the camcorder (see page 10).

2 In Tape Camera or Card Camera mode, press the DISPLAY button until the mode screen appears.

3 Press l or m on the Operation button to select “MENU”, then press the centre of the Operation button.

7 Press l or m to select “ON”, then press the centre of the Operation button.

DEMO MODE ON

8 Set the Power switch to OFF, then hold down the Lock button and set the Power switch to v.

• The demonstration begins.

Cancelling

1 During the demonstration, press the centre of the Operation button to pause the demonstration.

2 Perform step 3 to 6 in “Watching”, then select “OFF” in step 7.

Notes:

•The demonstration will pause if you press the centre of the Operation button. If you leave it for 60 seconds, or turn the power off temporarily and then set the Power switch to v, the demonstration will begin again.

•Demonstration mode does not work in self recording with reversed grip.

Appendix

4 Press l or m to select “EXECUTE”, then press the centre of the Operation button.

5 Press l or m to select Z, then press the centre of the Operation button.

6 Press l or m to select “DEMO MODE”, then press the centre of the Operation button.

O T H E R S 1
D E F A U L T
R EMO T E
B E E P
PH O N E S V O L	O F F
D EMO MO D E
R E T U R N	O N

90