Sharp VL Z 1 H Using the LCD Monitor, Closing the LCD monitor, LCD monitor rotates 270 vertically

Page 29

Using the LCD

Monitor

You can use the LCD monitor to play back recordings that you have made or to watch the subject during recording.

•You can also fold the LCD monitor into the camcorder with the screen facing out for watching playback on the monitor.

Power switch

LCD monitor

1 Open the LCD monitor to a 90° angle to the camcorder body.

90˚

2 Adjust the LCD monitor to an angle that allow easy viewing of the on- screen picture.

•The LCD monitor rotates 270° vertically.

180

90

Note: Do not try to rotate the LCD monitor vertically until the monitor is completely opened.

3 Hold down the Lock button and set the Power switch to v or w.

•A picture displays on

the LCD monitor.

Lock button

Note:

•Battery consumption is larger when the LCD monitor is opened. Use the viewfinder instead of the LCD monitor when you want to save the battery power.

Closing the LCD monitor

Return the LCD monitor to the vertical 90° position with the screen facing in, and fold it into the camcorder into place.

Notes:

•Do not use excessive force when moving the LCD monitor.

•When closing the LCD monitor, do not tilt it; otherwise the monitor may not close properly and may become damaged.

•Do not pick up the camcorder by the LCD monitor.

•Do not place the camcorder with the LCD monitor screen facing down.

•Close the LCD monitor completely with the screen facing in when not in use.

•Before closing the LCD monitor, make sure the battery pack is properly attached to the camcorder, otherwise the monitor may be damaged.

Preparation

17

Image 29

Contents VL-Z1H Page Power supply Blue Neutral Brown Live Special Note for Users in the U.KSpecifications are subject to change without notice Contents Using the Mode Screens Useful Features Advanced FeaturesRecording in LP Long Play Recording Mode Playback Functions with the Remote ControlContents Power cord Supplied AccessoriesPrecautions Dew Formation What is dew formation?Using a Cleaning Tape Commer- cially Available Precautions Dirty Video HeadsRemove the cleaning tape Causes of video head cloggingPart Names Operation ReferencesLCD monitor p DC in jack pp AV terminal Terminal cover Operation ReferencesPp , 55 DV terminal pStandby button RED indicatorPp , 8 SpeakerFully charged battery pack see pages 5 Battery is almost depleted. Replace it withCleaned see There is no video cassette in the camcorderAttaching Attaching Removing the Battery PackRemoving Take the battery pack outPreparation Insert the DC plug into the DC in jack of the camcorder Charging the Battery PackDC in jack cover DC in jack DC plugCamcorder from an PoweringAC Outlet Insert the DC plug into the DCPerform above, then take out the cassette Inserting and Removing a CassetteInserting Removing the Memory Battery Installing the Lithium BatteriesInstalling the Memory Battery Insert the battery holder back into position Installing the Battery to Remote Control Not Sup- pliedTime Setting the Date0 0 Press m or l to select ExecuteChanging to the 12-hour Time Mode Using the Lens CapSE T T I NG 10 3 0 0Open the hand strap flap 1 and grip strap Adjusting the Hand StrapUsing the Grip Pull out the viewfinder completely Using the ViewfinderDetaching the Lens Hood Push in the viewfinder completely Adjusting the dioptreClosing the viewfinder Closing the LCD monitor Using the LCD MonitorLCD monitor rotates 270 vertically Picture displays on LCD monitorHolding the camcorder Tips on Recording PositionsBasic posture Shooting from a high angleMaximum continuous recording and actual recording times Easy Camera Recording in Full Auto ModePress the Start/Stop button to begin recording Zooming To turn the power offBasic Operations Camera Recording To pause recording ZoomingTurning on/off Backlight Power Standby ModeTo resume operation To turn on the backlightBasic Operations Camera Recording Auto Focus Macro ShotsCAS SE T T E When the remaining recording time reachesTo stop playback PlaybackWatching the playback in the viewfinder OperationsStill Volume Control Video SearchSearching for a Scene Near the Current Tape Position Searching for a Scene Far from the Current Tape Posi- tionOpen the terminal cover on the camcorder see Watching Playback on a TVBasic Operations Playback To turn off the mode screen Using the Mode ScreensControl Buttons Operation buttonDG T L Zoom 4 Using the Menu ScreensUseful Features Zoom Setting the DigitalPress l or m to select Dgtl Operation buttonBLC / GA I N Useful Features Camera RecordingBacklight Compensation BLC Gain-up To cancel the gain-up functionTo cancel Fade mode UsingTo use Fade Out only Picture turns white, and the image and sound fadePress l or m to select Start Quick ReturnButton Then press the centre of the OperationEdit Search Still Recording To cancel the still imageRecording Standby mode, press the Photo button fully Press the Start/Stop buttonSelect OFF in above. The z indicator will disappear To cancel DIS functionDigital Image Stabilization DIS SO NSelf Recording Set the Power switch toNormal self recording Subject is displayedGrip Self recording with reversedOpen the LCD monitor to a 90 angle To the camcorder body 1, and thenTo return to normal screen Wide ScreenTo return to SP mode Recording in LP Long Play Recording ModeAudio dubbing is not possible with LP mode recording AP E SP E E D LPWindbreak To cancel WindbreakSelect 12bit in above Selecting the 16-bit Audio Recording ModeTo return to 12-bit audio recording mode Example screens shown are for Playback mode Using the Remote Control Not suppliedOperating ActivatingReverse Playback Playback Functions with the Remote Control Not suppliedSlow Frame AdvanceDate D I S P. DA T E Useful Features PlaybackSelecting the Date Time Recording Display Types To cancel Picture Effect PlaybackPicture Effect Playback Rotate Playback To cancel Rotate PlaybackAbove Press m to begin Rotate PlaybackManual Focus MF appears when the on-screen indicators are turned onFocus setting returns to Auto Focus mode Advanced Features Camera RecordingWhite Balance Lock To return to Auto White Balance modeTo return to Full Auto mode Manual Iris Manual Gain To return to Auto Gain modeSetting the Camcorder to Full Auto Mode Sport a When you want to record a fast-moving subject To cancel the scene settingSelected scene setting displays on the mode screen Scene Menu Program AEME COD E on Display formatDisplaying the time code on a TV during playback OU TCutting Unwanted Sequences EditingOn the VCR to resume recording when To stop editingCutting Unwanted Se- quences Advanced Features PlaybackEditing with the DV Terminal IEEE1394 Audio Recording Audio Dubbing FeatureTo cancel audio dubbing Advanced Features Playback Audio DubbingPress m to begin audio dubbing. Record your narration To pause audio dubbingAUD I O Selecting the Audio Playback ModeBit recording in mono Audio 1 and Audio 2 channels Bit recording in mono Audio 1 channel onlyAdjusting the Picture Picture/Backlight AdjustmentsAC K L I GHT BR I GH T Adjusting the BacklightE P Turning off the Confirmation SoundAppendix Setting the Camcorder to Factory Presettings Demo Mode on Demonstration ModeCancelling WatchingHints for Better Shooting Useful InformationTo protect recordings against accidental erasure Precautions when using a Mini DV cassetteMini DV Cassette This camcorder uses a lithium-ion type battery pack Battery PackCharging UseExtending battery pack life CleaningAC Adapter Replacing the Fluorescent LampAC Adapter Supplied Accessory Using Your Camcorder AbroadSymptom Possible cause Suggested solution TroubleshootingXii General Symptom Possible cause Suggested solution Camcorder SpecificationsOn-screen Display Index Camera modePlayback mode Sharp Corporation