Search
You can use the Search feature to find active frequencies in your area.
This feature is handy for finding frequencies besides those in your Betty Bearcat Starter Frequency Guide, or if you change locations.
You can search for any frequencies between 29.000 and 956.000 MHz, as long as they are within the 12 Bands covered by the BC860XLT.
See the table on page 3, or the Technical Specifications at the back of this Guide.
To use Search, set upper and lower limits. Then activate Search.
Note: Although you can set any limits for the Search within the above guidelines,
the wider the frequency range, the longer it will take to search all the frequencies. To save time, set narrower limits, and Search more than once.
1. Enter MANUAL mode. | 2. Set Lower Search Limit. | 3. Set Upper Search Limit. |
➪
➪
22