in one of these banks, pressing that bank key will make the scanner emit an error tone and the scanner will not scan.
Note: You cannot lock out any frequencies in the WX bank..
Lock Out Tips
If You Want to Do This - | Here’s How - |
|
|
Temporary Lock Out | While on a channel or frequency, press |
| L/O once. The scanner beeps and |
| temporarily locks out that channel |
| and displays T L/O. If the scanner was |
| not in Hold mode, it then resumes |
| scanning. If the scanner was in Hold |
| mode, it does not resume scanning |
| until one of the following actions is |
| taken: |
| • Press HOLD again to release the |
| Scan Hold function. Scanning |
| resumes on that bank. |
|
|
41