Konica Minolta F-2900 instruction manual Solution, Trouble Shooting

Page 82

TROUBLE SHOOTING

SYMPTOM or MESSAGE

SOLUTION

The computer will not start up after connecting the scanner.

DS_Elite does not appear in the Import drop down list.

“Could not establish connection with scanner.”

“Setting up now. Remove the film holder.”

Indicator lamp blinking rapidly (8Hz).

“Set film properly…”

“Set 35mm film holder properly.”

“Set APS film holder properly.”

“Could not recognize the film type.”

“Insufficient Memory”

“Setting up now. Remove the film holder.” appears when the film holder is not loaded.

•Shut down the computer and all the devices in your SCSI chain, then check the SCSI cables, SCSI ID connection, power cord, and SCSI ID.

•Make sure the plug-in module has been placed in the correct folder. See page 12.

•Indicator lamp is off - Turn the Dimâge Scan Elite on, then restart your system.

•Check that the SCSI ID is not being used by another SCSI device.

•Remove the film holder and click on OK.

•Scanner door opened during setup. Close scanner door.

•Load film into the film holder.

•Set the correct film type.

•Set the correct film type.

•Set the film type manually.

•Increase the memory requirements for the host application.

•If you have scanned multiple images, close and relaunch the host application.

•Contact a Minolta Service Facility to change the fluorescent lamp.

80

Image 82

Contents 9224-2885-11 H-A909 Page For Proper and Safe USE To avoid fire or electric shockSystem Requirements PC AT Monitor OtherSystem Requirements Macintosh Following contents should be included in this package Software RegistrationTable of Contents Scanner Names of Parts Scanner Setup Scsi ID Dip Switch Settings Setting the Scsi IDSetting the Scsi ID Connecting the Scsi Cable Connecting the HardwareIf there are other devices in your Scsi chain… Turn the terminator power switch switch 4 to on Windows Windows 95 Release 2 OSR2 Installing the Software PC/ATClick on Cancel WindowsThen click on Next Setup will begin Double-click on Installing the Software MacintoshDouble-click on Driver folder You can also click on to select an install drive A N D a R D O P E R a T I O N Launching the Twain Driver Windows Launching the SoftwareMacintosh Launching the Plug-in MacintoshLaunching the Utility Software Windows Double click onMain window Command Window part Name of partsMain WINDOW-NAME of Parts Preference Dialog Box Name of parts Setting the PreferencesClick on to accept the new preference settings Set the preferences as desiredLoading the Negative Holder Loading the Film HolderLoading the Slide Holder Insert slides into the slide holder emulsion side upInserting the Film Holder Into the Scanner PREVIEW-SETTING Film Type Setting the Film TypeSelect 35mm from the film format Drop-down list Preview window part Name of parts Cancelling AE-Lock Setting AE-LockAUTO-EXPOSURE Lock Click on Press the Shift key AE Area LockWhile pressing down the Shift key, change the AE area Rotate Orienting the ImageClick on to flip the image top to bottom FlipClick on to flip the image left-to-right Auto Cropping CroppingMagnifying or Reducing the View Displaying Frame number APS only ScrollAPS formats C, H and P APS only RGB/CMY informationImage correction window part Name of parts Image Correction Tone CURVES/HISTOGRAM Changing Tone Curves by Freehand Correcting the Tone CurvesDraw the desired curve by dragging Displaying the Histogram of Each R, G, B color Correcting the HistogramClick the RGB Display button Setting the Black Point Double-click the Black Point button Setting the White or Black PointsSetting the White Point Double-click the White Point button Click the desired highlight point of the imageClick the Gray Point button Setting the Gray PointAuto setting Click the point to be changed to gray in the imageImage Correction BRIGHTNESS/CONTRAST/COLOR Balance Post-Correction LUT Image Correction HUE/SATURATION/LIGHTNESS Pre-Correction Color Sample and Post-Correction Color SampleReset Selecting the Correction Item Image Correction Variation CorrectionClick the colour balance Color Balance CorrectionBrightness & Contrast Correction Correct the image by repeating the operation in stepSaturation Correction Image Correction Snapshot Storing in the Snapshot Display Area temporarilyDisplaying the image stored temporarily as a preview image Click on the thumbnail in the Snapshot Display AreaClick the Full-Screen View button Full-Screen ViewChecking the Correction Result While Lining Up Images Image Correction JOB SAVE/JOB Load Input the job name and click on the OK buttonRedo the Correction Loading Image Correction JobDelete the Image Correction Navigation Navigation Dialog box Name of partsClick the Navigation Start button Navigation MenuOperation item checkbox Saving, Selecting and Deleting a Navigation Setting Select the setting to be deleted and click the Delete buttonUtility Software Twain Driver Plug-in SoftwareFinal Scan A N N I N G a P S F I L M Launch Software Specify Film Type Preferences APS Settings Set the Preferences as desired in the APS settings partAPS Adapter Optional Names of PartsLoading the APS Adapter Slide the film-chamber release as shownInserting the APS Adapter Index Window Names of Parts Index ScanClick on to reverse the display order Click on the corner tab and drag to reach the desired size Rotating the Index FramesSelect the desired frames, then click on , or Preview and Image Correction Close the Preview window to return to the Index windowClick on an image to select it for scanning Selecting FramesScanning the Image Click on to scan the selected imagesRemoving the APS Adapter Click on to rewind the film into the cassettePage P E N D I Color Matching in the Preference Dialog Box Name of parts Color MatchingWhen using Photoshop Ver.3.0.5 or Ver Select the ICC profile according to the monitor being usedScan Settings Scan Settings part in the Main Window Names of partsExcept the Image Correction window in the Main window Job names Enter the desired output size maximum 3 digits Deleting a Job Creating a JobCreating / Deleting JOB Files Printer Scan Job Category Description CustomColor Laser PhotosensitiveScan JOB File List 35MM Category Job name Out Mag UnitCategory Job Name Out Mag Scan JOB File List APS Glossary ContrastShadows Solution Trouble Shooting17.28 x 29.95mm 1920 x 3328 pixels SpecificationsPrescan Sec Scan 40 sec Index Scan Sec/frame Interface Determining the version number of your driver software User Technical Support