Kyocera NX instruction manual List of custom functions, List of Custom Functions

CUSTOM FUNCTIONS

1. List of custom functions

This camera is equipped with the 20 custom functions, shown on the table below. When the camera is first purchased, these are all set to the stan- dard or “default” functions (standard setting number “0”). (Note that all the explanations in this manual assume the detail numbers are set to “0”). To change the custom functions, refer to “Setting custom functions” (page 89).

•When the custom functions are set, the camera’s functions and operating procedures change. Read this section carefully and be sure to use these features to your best advan- tage.

<List of Custom Functions>

The functions of this camera can be customized to match your shooting style. As you work with this camera you will develop your own personal approach.

Detail number

Function number

Power hold time

•Illumination time also changed.

AE lock by half- pressing the shut- ter button

Standard set-	Changed set-	Changed set-		Changed set-
ting (0)	ting (1)		ting (2)		ting (3)
16 sec.	12 sec.		8 sec.		4 sec.
No AE lock	AE lock on

Shutter time set- ting step

Exposure compen- sation step

Evaluative meter- ing display

ABC Exposure order

AF target setting

AF supplementary light

AF focus beep

Superimpose when shutter but- ton half-pressed

1 Tv	1/2 Tv
1/3 EV	1/2 EV
Exposure com-	Difference to the		Difference to
pensation	center divided	center-weighted
value	partial metering	average metering
Standard →	Over → stan-
over → under	dard → under
Focus frame	LIGHT button +
	focus frame
select lever
	select lever
On	Off
On	Off
On	Off

86 87