Kyocera NX Contax Mount adapter NAM-1, Contax Flexible case C-9, Removing, Extended

Page 59

5. Contax Mount adapter NAM-1

5

6

3

1

2

4

This adapter allows the use of Contax 645 System lenses with the Contax NX. Usable with all NX models.

<Mounting the mount adapter and lens>

1.Line up the body mount mark on the mount adapter with the camera’s lens mark Insert, then turn in the direction of the arrow to mount.

2.Line up the mark on the lens (red) with the lens mount mark on the adapter , then turn in the direction of the arrow to mount.

<Removing>

1.To remove the lens, slide the mount adapter’s release button , hold it there, then turn the lens counterclockwise and remove it.

2.To remove the mount adapter, turn it counterclockwise while pressing the camera’s lens release button.

6. Contax Flexible case C-9

By extending or contracting the tip of the case, the NX can be placed in the case with the Data back D-11 and the following Carl Zeiss T* lenses mounted (645 mount lenses require the NAM-1 mount adapter).

Lenses (with one filter, lens cap, and hood (reversed))

Case

 

Tip

 

N mount lens

 

645 mount lens

 

 

 

 

 

 

 

 

 

Contracted

 

VS28-80/3.5-5.6

 

P80/2

 

 

 

P50/1.4

 

 

 

 

 

 

 

C-9

 

 

 

 

 

 

 

VS70-200/3.5-4.5

 

 

 

 

Extended

 

VS24-85/3.5-4.5

 

S140/2.8

 

 

 

VS17-35/2.8*

 

D55/3.5

 

 

 

 

 

(* without hood)

*Use the C-8 flexible case (for the N1) when the MS100/2.8, VS70-300/4.0-5. 6, and 645 mount lens AMP 120/4, D45/2.8, D3.5/3.5 (* without hood) lenses are fitted.

102

103

Image 59 Kyocera NX Contax Mount adapter NAM-1, Contax Flexible case C-9, Mounting the mount adapter and lens, Removing, Extended
Contents GB /D English Safety warningsPage Microcomputer Protective Circuit Photography using infrared filmStoring the camera Contents Names of Parts Viewfinder display Display Panel and Viewfinder DisplayDisplay panel Display panel illumination Basic Operations Prior to Shooting Fitting the eye cup/diopter correction lens Fitting the strap and viewfinder shade adapterInserting the batteries Inserting the batteries and checking the battery powerRemove the cameras body cap and the lens rear cap Mounting and removing lenses Holding the cameraMounting lenses Removing lensesLoading film Checking the film speed Setting the film speed manuallyAutomatic setting of the ISO film speed Rewinding mid-way through the film Removing filmBasic Operations Power hold time Main switch Shutter release buttonCameras power is off On The cameras power is onSET Position dialR dials PhotographyMode details Mode button and mode detailsFocus button Sync switchMetering mode details ABC/ buttonPage Using the Green Setting On the Position Dial Simple Shooting ProcedureSubject and half-press the shutter button Using the green setting on the position dialFocusing mode flashes GreenLocking a selected frame FocusingSelecting focus frames Selecting focus framesCAF continuous autofocus Focusing in the autofocus modeSAF single autofocus Focus lock SAF single autofocus modeCAF continuous autofocus mode Focus display with manual focusing Focusing manuallyAdjusting the focus Relationship between the focus mode and drive modeUsing lenses with an AF/MF select switch Selecting the Metering Mode Evaluative metering mark Types of metering modes and their features Metering rangeAutomatic metering range Autoexposure photography Set the exposure mode lever to AVSee page 31 for setting details Applied Photographic TechniquesTv stands for Time value Set the exposure mode to PSet the exposure mode to Tv Program auto-control diagramUnder-exposure warning Set the exposure mode to MManual exposure photography Over-exposure warningExposed while the shutter button is Set the aperture with the lensGraph Shutter is released and the film isTaking photographs with exposure compensation Setting exposure compensation manually with Av, Tv, PExposure mode What is compensatedTaking photographs with the AE lock Exposure mode What is compensatedFocus on the subject and press the shutter button Press the ABC button to set the ABC modeABC stands for Automatic Bracketing Control Display panelUsing the selftimer Changing the date and time Replacing the Data back batteryDate and time imprinting Depth of field Cable switch socketChecking the depth of field Replacing the camera backPage Flash Photography Taking photographs using the internal flash Press the button to set light compensation Light compensation with the internal flashRange for internal flash photography units in m Sation valueTaking photographs using the TTL auto flash function Taking photographs using a Contax TLA flashAuto set function Taking photographs using a Contax TLA360 flashAuto setting of the angle of illumination Manual setting of the angle of illuminationShoe stopper Taking photographs using other flashes with the X contactFlash intensity compensation Auto off and auto on functionsDaylight synchronization photography Flash photography techniquesSlow synchronization photography Ghost movement of the subject thus appears more natural Set the sync select switch toSecond curtain synchronization Use with exposure compensationList of Custom Functions Custom FunctionsList of custom functions Turn the F dial to select Detail number Setting custom functionsSet the position dial to CF Basic information on photography ReferenceSolution See TroubleshootingSymptom Cause Solution See Symptom Cause1/2Tv as custom function Tv and M With Tv and M Shutter speed and aperture value displayShutter speed Aperture value Av or P displayed in steps All modesMain Accessories Attaching Contax Cable switch LA typeContax Data back D-11 Fitting to the cameraLoad the batteries in the Power pack. P-8 Contax Power pack P-8, P-8DSpecifications Fit the GP-1 Contax power pack adapter to the camera8D specifications Contax Power pack adapter GP-1Removing Contax Mount adapter NAM-1Contax Flexible case C-9 Mounting the mount adapter and lensMain specifications Dimensions and weight