Drive Medical Design 14027 manual Handling & Storage, LOW Pressure

Page 14

HANDLING & STORAGE

Lay the mattress out flat and upside down.

Roll from the foot end towards the head end; the foot-end strap can then be stretched around the rolled mattress to prevent unrolling.

Do not fold, crease or stack the mattress.

Follow the national requirement to dispose of the mattress or pump.

MAINTENANCE

GENERAL

Check the power cord and plug to see if there are abrasions or excessive wear.

Check the mattress cover for signs of wear or damage. Ensure the mattress cover and tubes are connected together correctly.

Plug in the pump and check the airflow from the hose connection port. The airflow should alternate between ports every half-cycle time.

Check the air hoses to see if there are kinks or breaks. For replacement, please contact your local agent or dealer.

Make sure the mattress tube is well connected.

Check the pump and make sure both power and power indicator are off when the switch is turned off.

LOW PRESSURE

Examine if there is air leakage between the pump and the mattress connections or from the air mattress tubes:

Check connectors between the air mattress and pump. If there is any disconnection, please reconnect it.

Check the CPR Valves. Ensure their outlets are sealed.

Check the air-connecting tubes. Ensure each single cell is not broken.

Turn the pressure-adjust knob to Firm. Keep the tubes fully inflated and inspect for air leakage.

Check if there is any air leakage from cells. Ensure no leakage occurs. If any leakage occurs, please contact your local agent or dealer.

14

Image 14
Contents Item # Table of Contents Important Safeguards Read ALL Instructions Before UsingStatements & Symbols OthersIntended USE IntroductionGeneral ContraindicationMattress Package ContentPump Cover SheetProduct Functions Installation StepGrounding Instructions For patients OperationFor products Hand checkAlways read the operating instructions before use LOW Pressure Warning Pressure SET UPCPR Function Cleaning Handling & Storage LOW PressureTroubleshooting Specifications SystemWarranty Page Page Seaview Boulevard Port Washington, NY Phone Fax