Toshiba IK-6550A Setting mode call and basics, Camera Setup, 1. D/N Mode DAY/NIGHT Mode

Page 13

8.2 Setting mode call and basics

<CAMERA SETUP>

Press the SELECT switch down about 2 seconds then menu will appear on the display.

Use the buttons to select <CAMERA SETUP>.

8-2-1. D/N MODE (DAY/NIGHT MODE)

<CAMERA SETUP> <PRIVACY ZONE> <CAMERA ID>

EXIT CANCEL DEFAULT

	Selections:		D/N MODE	AUTO
	AUTO (default): The camera will sense the brightness
			D/N LEVEL	LOW
		level and switches to color mode or
			SHUTTER	IRIS
		monochrome mode.
			GAIN	STD
	COLOR:	Color mode
			SYNC	INT
	B/W:	Monochrome mode
			BLC	OFF

	Process:		SHARPNESS	MID
			WB	AUTO
	1. Position the cursor ( ) next to CAMERA SETUP		<OPTION>
	and press the SELECT switch to access the		BACK
	camera menu.

2.Position the cursor () next to D/N MODE and press the SELECT switch to access menu.

3.Use the buttons to select AUTO, COLOR or B/W.

4.Press the SELECT switch to accept the selection.

- 13 -

Image 13

Contents CCD Color Camera Table of ContentsImportant Safeguards Page Components Features & DescriptionLeftsideView TopView Part Names & FunctionsCamera Installation Do not overload power supply Basic connection Single system configurationConnections and Operations Line-Lock Control CAMERA1 Monitor TV CAMERA2 Video SwitcherOperation Back-Focus Adjusment LensLINE-LOCK Phase Menu MENU-DRIVEN SET-UPMain function Setting switches and the functionsCamera Setup Setting mode call and basics1. D/N Mode DAY/NIGHT Mode Shutter Exposure time 2. D/N Level DAY/NIGHT LevelSync Gain AGCBLC Back Light Compensation WB White Balance SharpnessChroma OptionBack Privacy Zone Back Zone Posih Back Zone Sizeh Camera ID Camera IDBottom ID POS ID PositionCancel discard the changed settings Exit save the changed settingsDefault return all settings to factory default Menu List and Settings Case of Problems Specifications Exterior View Memo Memo Limited Warranty