Toshiba IK-6550A instruction manual

Page 3

• The CAUTION label, shown on the left, is attached on the camera.

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING :

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION :

CONNECT 24V AC UL LISTED CLASS 2 POWER SUPPLY.

FIELD INSTALLATION MARKING : THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.

FCC (USA)-INFORMATION

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party.

- 3 -

Image 3
Contents CCD Color Camera Table of ContentsImportant Safeguards Page Components Features & DescriptionLeftsideView TopView Part Names & FunctionsCamera Installation Basic connection Single system configuration Do not overload power supplyConnections and Operations CAMERA1 Monitor TV CAMERA2 Video Switcher Line-Lock ControlOperation Back-Focus Adjusment LensLINE-LOCK Phase Menu MENU-DRIVEN SET-UPMain function Setting switches and the functionsSetting mode call and basics Camera Setup1. D/N Mode DAY/NIGHT Mode Shutter Exposure time 2. D/N Level DAY/NIGHT LevelSync Gain AGCBLC Back Light Compensation WB White Balance SharpnessChroma OptionBack Privacy Zone Back Zone Posih Back Zone Sizeh Camera ID Camera IDBottom ID POS ID PositionExit save the changed settings Cancel discard the changed settingsDefault return all settings to factory default Menu List and Settings Case of Problems Specifications Exterior View Memo Memo Limited Warranty