Physical Description

Inner View

Vari-focal Lens	IR LEDs
(f= 3~9 mm)	Light Sensor
SD/SDHC Card Slot	Light Sensor
	Rotation Adjustment
	Screw
	Tilt Adjustment Screw
	Pan Adjustment Screw
Status LED
Reccessed Reset
Button
	Focus Controller
	Zoom Controller

Heater Fan

N.C.
N.C.
N.C.
AC24V	General I/O Terminal Block
AC24V	General I/O Terminal Block
	Ethernet 10/100 RJ45 Plug
	Audio Out (green)
	Microphone In (pink)
	Power Cord Socket (black)

Ground

Operating environment: –30 °C ~ +50 °C {–22 °F ~ 122 °F} *1

When the temparature inside the Network Camera reaches over 50°C, the fan will operate automatically; when the temparature inside the Network Camera drops to 0°C, the heater and fan will both operate automatically.

*1 When the camera is installed and operated in low temperatures below –10 °C {14 °F}, normal images may not be obtained immediately after startup. In such a case, wait until the camera warms up (taking more than 1 hour) and start adjustment after turning on the power again.