Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by doing the following:
To adjust the viewing angle -- 3-axis mechanism design
1.Loosen the pan adjustment screw and then turn the lens module left and right. Upon completion, tighten the screw.
2.Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and down. Upon completion, tighten the screws.
3.Loosen the rotation adjustment screw and then turn the lens to adjust the image orientation. Upon completion, tighten screw.
|
| Rotate the screw |
| The sophisticated | very flexible, |
|
| ||||
|
| Turn the lens |
| easy hardware installation for either ceiling or | wall mount. |
|
|
|
|
|
|
Loosen 1
Do not tighten the tilt adjustment screws too much by screw driver. Doing so will damage the tilt mechanism.
Tighten
Loosen
Loosen | 2 |
| Tighten |
Tighten | 3 |
|
Pan 350° |
| Tilt 85° |
| Rotate 350° |
|
|
|
|
|
To adjust the zoom factor and focus range
1.Loosen the zoom controller to adjust the zoom factor. Upon completion, tighten the zoom controller.
2.Loosen the focus controller to adjust the focus range. Upon completion, tighten the
focus controller.
Loosen
Tighten
W
N T
8
DO NOT overrotate the lens. Doing so will damage the camera lens module.
21