Toshiba IKWR04A user manual Applications Digital input, Applications Tampering detection

Applications > Digital input

Advanced Mode

Digital input: Select High or Low to define the activate status for the digital input. The Network Camera's current status is shown.

Set up the event source as DI on Event > Event settings > Trigger. Please refer to page 83 for detailed information.

Applications > Tampering detection

This section explains how to set up camera tamper detection. With tamper detection, the camera is capable of detecting incidents such as redirection, blocking or defocusing, or even spray paint.

Please follow the steps below to set up the camera tamper detection function:

1.Check Enable camera tampering detection.

2.Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the tampering factor (the difference between current frame and pre-saved background) exceeds the trigger threshold.

3.Set up the event source as Camera Tampering Detection on Event > Event settings > Trigger. Please refer to page 83 for detailed information.

98