Rev 1.0
6. Serial control
You can control following functions in camera link I/F.
(1)Memory control ・Save
・Load
| ・Reset |
|
|
(2) | Readout mode setting | All pixel readout / Partial scan/ | |
(3) | Random trigger shutter setting | ON/OFF | |
|
| * When the random shutter is active, AE setting is disabled. | |
| ・trigger polarity | Positive polarity/Negative polarity | |
| ・Random trigger mode | Pulse width mode / Fixed mode | |
(4) | Multiple‐shutter | ON / OFF | |
|
| *Enabled when random trigger shutter is ON | |
(5) | Shutter settino | AE/MANU | |
|
| * When the random shutter is active, AE setting is disabled. | |
| ・AE setting | AE Lock | |
|
| AE Adjust setting | |
| ・MANU setting | 1/15, 1/30, 1/48 ～ 1/35,000 | |
(6) | Gain setting | 0 | ～ + 6 dB (256levels) |
(7) | Setup setting | 4 | ～ 27 LSB (32levels) |
(8) White balance setting | OPWB / MANU | ||
| ・MANU setting | Preset setting(6data) / User manual setting （R / B Gain）setting | |
(9) | Gamma correction | ON / OFF | |
(10)Masking correction | ON / OFF | ||
D4134176A
9