Toshiba CS3910BH specifications Specifications

5. SPECIFICATIONS

Model	CS3910BH
[Electric specification]
Image sensor	Interline CCD
Total pixel	1434(H) x 1050(V)
Active pixel	1392(H) x 1040(V)
Unit cell size	6.45(H) x 6.45(V) micrometer m
Optical size	Equivalent to 2/3 inch image pickup tube
Scanning system	Non-interlace
Aspect ratio	4:3
Sync system	Internal / External automatic switchover
Illumination	200 lx (F8 3200K)
Gamma correction	Gamma = 1.0(Fixed)
Video output	Digital output: EIA-644
	Data: 10bit (28.63636MHz)
Scanning frequency	15.29Hz (All pixel data read-out mode) or
	60.37Hz (High-speed draft mode)
AGC	+/- 6dB
Power source	DC12V +/- 10 percent
Power consumption	Approximately 2.7W
S/N	50dB(p-p/rms) (Under normal mode)
[Electric shutter specification]
Shutter speed	8 scales from 1/30s through 1/10000s
RTS	Random Trigger Shutter
	ON/OFF selectable (factory setting: OFF)
	Fix mode --- Exposure-time determined by E shutter-speed
	Pulse mode --- Exposure-time determined by pulse width
Partial scan	ON/OFF selectable (factory setting: OFF)
	ON --- Screen center 1/2 readout
Multiple shutter	ON/OFF selectable (factory setting: OFF)
	Fix mode --- Exposure-time determined by E shutter-speed
	Pulse mode --- Exposure-time determined by pulse width
[Internal sync, signal specification]
H drive frequency	28.63636MHz+/-100ppm
Scanning frequency	H: 15.998kHz+/-100ppm
	V: 15.29Hz+/-100ppm (All pixel data read-out mode)
	60.37Hz+/-100ppm (High speed draft read-out mode)
[External sync, signal specification]
External sync signal
HD	TTL level, Negative, Input impedance: 10k-ohm
	Repeating frequency 15.998kHz +/- 1 %
	Pulse width: Longer than 5 micro s
VD	TTL level, Negative, Input impedance: 10k-ohm
	Repeating frequency 14.98Hz +/- 1 percent
	Pulse width: Over 1H(62.5 micro s)

12

D4134051A