Toshiba CS8560D specifications Connector pin assignment

Page 29

[Connector pin assignment]
(1)	Compatible connector	HR10A-10P-12S (Supplied by HIROSE ELEC.)
(2)	Pin assignment	Connector pin layout

①⑨

②⑩ ⑧

③⑪ ⑫ ⑦

④⑥

⑤Picture Rear-panel camera connector

(Rear-view)

		12 pin male

Pin	Signal	Signal
No.	(Standard)	[Option]
1	DC12V GND
2	DC12V

3VIDEO GND

4VIDEO OUT

5	HD GND
6	HD IN
7	VD IN
8	TRIG GND	NC
9	NC	TRIG IN
10	WEN OUT	GND
11	TRIG IN	DC12V	NC
12	VD GND	PARTIAL

Notes : *Before connecting / disconnecting the connector, make sure the camera power is OFF. **For board connection, check compatibility.

Note: Items shown as [Option] in this document is not included in your purchase as standard components. Contact our dealer / distributor for details.

29

D4130891A

Image 29

Contents D4130891A CCD Camera Model CS8560D SpecificationsDo not repair, disassemble and/or modify by yourself Graphic symbol definitions Indication MeaningThis may cause fire and/or electric shock Turn OFF the power in the case of connection Use the specified power supplyAvoid short-circuiting signal output Don’t place things or materials on the unitDisclaimer Limited Warranty D4130891A Product Description Rear DIP SW Exposure-time control via rear-panel DIP switchCamera adapter ·················· Model name CA170 Video OUT 120s 21 InterlaceEXT VD Sync reset mode Under internal sync Trig 60s Non-interlace „ RTS Trig in notesExposure time is determined by VD interval Option Under other shutter modesEven Field 10H Standard 11H 24H 30H 23.5H 31H Standard9H WEN OUT Option EXT VD EXT HD 68H 448H Timing is as followsODD Feild 120s 21 Interlace, ODD fieldEven Feild 120s 21 Interlace, Even fieldInternal sync spec Basic specShutter trigger spec Sync signal specExternal sync spec Partial scan 1Operation mode Electronic shutter spec Video OUT Ambient condition Mechanical specConnector pin assignment CCU rear-panel DIP SW Switch settingInitial factory setting All OFF Relative Spectrum Response Optical black characteristicsCAM Ext. VD Ext. HD phase difference ODD 1st field Under partial scan V-reset mode Standard WEN timing aNormal shutter mode 60s Non interlace mode120s Interlace mode Even Field 120s Interlace mode ODD FieldUnder partial scan mode BRTS Non-reset mode Consecutive VD 1/60s Non interlace mode252.5H 10H DRestart / reset mode 1/60s Non interlace mode EXTERNAL-VIEW Drawing 41D4130891A