Toshiba CS8560D Switch setting, CCU rear-panel DIP SW, Initial factory setting All OFF

[Switch setting]

(1) CCU rear-panel DIP SW

No.	Function	OFF	ON
	GAIN selection	Factory-set	Manual GAIN	GAIN	1	O
1			adjustable		2	N
	(GAIN)	GAIN
			via GAIN	SHUT
					3
2	E-shutter-speed
		See shutter-speed table (Table 1)			4
3
	(SHUT)
4				VIDEO 5
5	Video output	1/60s non-interlace	1/120s interlace	SMODE	6
	mode (VIDEO)				7
6	Shutter mode	See shutter-mode table (Table 3)		PART	8
7	(SMODE)
					9
8	Partial scan	See partial-scan table (Table 2)		EXP
					0
9	(PART)
0	RTS Exposure	FIX mode	PULSE W mode
	(EXP)
	Notes: *	Initial factory setting: All OFF

(Table 1) Electronic shutter-speed

Shutter-speed	No.2	No.3	No.4
OFF	OFF	OFF	OFF
1/200s	ON	OFF	OFF
1/500s	OFF	ON	OFF
1/1,000s	ON	ON	OFF
1/2,000s	OFF	OFF	ON
1/4,000s	ON	OFF	ON
1/8,000s	OFF	ON	ON
1/20,000s	ON	ON	ON

(Table 2) Partial-scan

Partial scan	No.8	No.9
OFF	OFF	OFF
Not acceptable	ON	OFF
1/2 partial	OFF	ON
1/4 partial	ON	ON

Notes : *Don’t set Electronic shutter-speed in OFF under RTS mode.

(Table 3) Shutter-mode

	Shutter mode		No.6	No.7	SYNC
Random		V reset	OFF	OFF
		SYNC reset	ON	OFF	Internal sync
trigger
		Non-reset	OFF	ON
Not		acceptable	ON	ON
Random		Non-reset	OFF	OFF	Single VD
		(Multiple shutter)				Ext. sync
trigger		Non-reset	ON	OFF	Consecutive VD
						HD IN
		V reset	OFF	ON	No VD
	Restart / Reset		ON	ON	Single VD

Notes : * Under normal shutter mode partial-scan, set No.6,7 in OFF. **Under PULSE W mode, SYNC reset is disabled.

(2)CCU rear-panel SW

Function	SW	Selected Function
Ext. SYNC IN impedance	HIGH	HIGH impedance (Initial factory setting)
(HD/VD)	75Ω	75Ω

30 D4130891A