Toshiba IK-WD12A user manual Sensor Settings Advanced Mode

Sensor Settings Advanced Mode

Click Sensor Settings to open the Image Sensor Settings page. On this page, you can set the maximum exposure time, exposure level, and AGC (Auto Gain Control) settings.

You can configure two sets of sensor settings: one for normal situations, the other for special situations, such as day/night/schedule mode.

2010/01/15 16:11:49

Sensor Setting 1:

For normal situations

Sensor Setting 2:

For special situations

Exposure

■Maximum Exposure Time: Select a proper maximum exposure time according to the light source of

the surroundings. The exposure times are selectable for the following durations: 1/120 second, 1/90 second, 1/30 second, 1/15 second, and 1/5 second. Shorter exposure times result in less light.

■Exposure level: You can manually set the Exposure level, which ranges from 1 to 8 (dark to bright).The default value is -1.

■Max gain: You can manually set the AGC level (2X 4X, or 8X). The default value is 4X.

■Enable BLC (Back Light Compensation): Enable this option when the object is too dark or too bright to recognize. It allows the camera to adjust to the best light conditions in any environment and automatically give the necessary light compensation.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the settings and click Close to exit the page.

65