Toshiba IK-HD1D instruction manual Scene File, Gain

Page 14

6 3 Scene File

Five scene files (A, B, C, D, E) are available as user memories for this unit. These are chosen depending on shooting conditions. By using the [FILE] button, the camera operation is changed immediately from the currently selected Scene File to the next. (Refer to the item “7. MODE SETTING BY THE ON SCREEN DISPLAY”.)

䊶While any menu is displayed, pressing the [FILE] button will display the menu settings for the next Scene File:

FILE A

FILE B

FILE C FILE D FILE E

䊶When the [FILE] button is pressed while the camera is in live image mode, the current scene file selection at that time is displayed for approx. 3 seconds in the upper right corner of the screen. If the [FILE] button is pressed again while the position is displayed, the scene file cycles as described above.

6 4 Gain

When the image is dark even if the lens iris is open, change the gain (video gain) to get the desired video level. For gain adjustment of the unit, AUTO (Automatic gain control), MANUAL (Manual), OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item “7.2 (2) GAIN (Video gain)”.)

AUTO(Automatic gain control)

When the output is low, gain is automatically adjusted to a suitable video level.

The maximum value of gain is 18dB, and can be set from 0 to 18dB in 1dB steps. (Refer to the item “7.2 (2) (2.1) Changing the maximum gain in AUTO (Automatic gain control) mode”.)

Video level (LEVEL), peak average value ratio (PEAK/AVE), and measurement light area (AREA) is linked to the setting on the automatic shutter. (Refer to the item “7.2 (1) (1.1) Changing the setting in AUTO mode”.)

MANUAL(Manual gain)

Gain adjustment is performed on the GAIN menu. The adjustment range is from 0 to 18dB in 1dB steps. (Refer to the item “7.2 (2) (2.2) Changing gain in MANUAL mode”.)

OFF

Gain is fixed at 0 dB.

Gain button

If the [GAIN] button is pressed, the current setting mode is on the GAIN menu for approx. 3 seconds.

GAIN menu : OFF → GAIN OFF

: AUTO → GAIN AUTO

: MANUAL dB → GAIN dB

“ ” shows the setting gain in MANUAL mode.

If the [GAIN] button is pressed again while the current setting mode is displayed, the gain mode can be changed.

GAIN of MAX GAIN in AUTO mode and MANUAL mode can not be changed.

OFF AUTO MANUAL

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents IK-HD1D Safety Precautions Disclaimer Table of Contents Limitation of UsageOption Components Handling the unitAvailable selections Preset value Factory setting Items Controlled by the on Screen DisplayMenu UP Power LEDNames and Functions Data UPDVI-D ConnectionStandard Connection GND 3A Connector Pin AssignmentsConnection on Back Panel Back panel view RXD GND TXD Display Meaning Operation Automatic Black Balance 䋨Automatic Tracking FeaturesWhite Balance 䋨Manual White Balance䋩AWB OK Scene File GainShading Correction Automatic shading correction operation finished correctlyMode Setting by the on Screen Display Using the MenusAuto Manual MenusSHUTTER䋨Electronic shutter䋩 Flicker may be largeChanging the automatic shutter response speed 䋨1䋮1䋩 Changing the setting in Auto modeChanging the video level in the automatic shutter mode Preset a Preset B Preset C Preset D Preset E Changing the automatic shutter zone areaChanging the shutter speed setting 䋨1䋮2䋩 Changing the setting in Manual mode䋨1䋮3䋩 Changing the setting in SS Synchro. Scan mode Changing the shutter speedGain Video gain Mode Auto MAX Gain䋨2䋮2䋩 Changing gain in Manual mode Modemanual䋨3䋩 WHT BALWhite Balance Changing color temperature settingConfirming the contents of the zone area selected by AWB Changing R PaintMode ATW Paint Changing the red gain 䋨3䋮3䋩 Changing gain in Manual modeMode Manual Gain Temp Changing the blue gain䋨4䋮2䋩 Changing gamma correction level 䋨4䋩 Process䋨4䋮1䋩 Changing gamma correction ON/OFF 䋨4䋮5䋩 Changing DNR Digital Noise Reduction 䋨4䋮3䋩 Changing detail outline gain䋨4䋮4䋩 Changing master pedestal 䋨5䋮1䋩 Changing Matrix color correction ON/OFF 䋨5䋮2䋩 Changing Matrix setting䋨5䋩 MATRIXMatrix color correction 䋨6䋩 Sync 䋨6䋮2䋩 Changing EXT. settingAdjusting horizontal phase 䋨6䋮1䋩 INT screen䋨7䋮3䋩 Changing manual shading correction mode 䋨7䋮1䋩 Changing Output mode䋨7䋮2䋩 Changing shading correction mode 䋨7䋩 OptionOutput RGB 䋨8䋩 Returning to factory settings䋨7䋮6䋩 Changing OSD Output mode RGB SyncSetting by 1H 䋨1䋩 External sync signal input conditionsUsing the unit with external sync signal External SyncBefore Making Service Call Symptom Items to be checkedSync SpecificationsCCD IK-HD1HExternal Appearance Diagram RearLimited Warranty Toshiba CCD Camera
Top Page Image Contents