Samsung SHC-740N/P instruction manual Using Remote Jack / MD Output / D&N Input

Page 21

Operating Your Camera

IMAGE ADJ: This includes the factors related to the image quality or special function.

-TONE : As you increase the value using left or right button the whole level would be brighter.

-SHARPNESS : As the value goes high, edge of image become strong and obvious. But if increasing the value too much, some noise may appears on image and image may looks unnatural.

-COLOR : As you increase or decrease the value, image chroma level increases or decreases but the burst level doesn’t.

2. Setup menu Command.

Setup menu

Command

Byte

Set

153

1

Up

65

1

Down

66

1

Right

67

1

Left

68

1

3. MD(Motion Detection) output Signal Level(less than 10mA)

PRESET: To reset your camera to factory default condition

RETURN: To move Top-menu EXIT: To finish setting menu

0V

There is no motion

+4.0V~+5.0V

There is motion

5±0.5sec

Using Remote Jack / MD Output / D&N Input

If you connect a remote plug to the REMOTE jack on the rear of the camera as shown below, you can access the menu setup mode from a remote place.

1. RS-232C Communication Setting.

 

• Mode : Serial

• Data Bit : 8

• Bit/sec : 9600bps • Stop Bit : 2

• Port : Com1

• Parity : None

• Flow Control : XON/XOFF

 

COLOR CCD CAMERA 40

User’s Manual

4.D&N input Control Signal

If you want to use EXT mode, consist proper system that satisfy below condition

For DAY mode, D&N terminal should be open from GND terminal.

For B/W mode, D&N terminal should be short to GND terminal.

Notes

• You must turn the camera power off when you connect or remove the remote plug.

COLOR CCD CAMERA 41 User’s Manual

Image 21
Contents Sales Network About this manualPage High Resolution Stop using your camera when you find a malfunctionDay & Night Camera needs periodic inspectionContents Precautions Or spill beverage on it RadioactivityCamera Name and Function of Each Section CompositionSide Name and Function of Each SectionConnection Installing Auto Iris LensVideo type DC type Installing C/CS-Mount lensMounting a C-Mount lens Connecting to MonitorConnecting to Power Configuration of The MenuOperating Your Camera Camera ID Setting Up The MenuIf you make a mistake while entering name Press SET buttonWhite Balance Control BacklightMotion Detection Lens Selection Tips on Using the Motion Detection FeatureFLK1/100 for Ntsc Model,1/120 for PAL Model Shutter Speed ControlTo get brighter picture AGC Auto Gain ControlSpecial SSNRSamsung Super Noise Reduction‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power Using Remote Jack / MD Output / D&N Input Troubleshooting ProblemProblem Solution Ntsc SHC-740N SpecificationsMemo

SHC-740N/P specifications

The Samsung SHC-740N/P is a high-performance surveillance camera that stands out in the realm of security technology. This model is engineered to deliver impressive image quality, versatility, and a range of advanced features tailored for various monitoring applications. It is particularly well-suited for both indoor and outdoor environments, making it a popular choice among businesses and homeowners alike.

One of the most notable features of the SHC-740N/P is its ability to capture high-resolution video. With a resolution of up to 720 TV lines, the camera ensures clear and detailed image capture, which is critical for effective surveillance. This clarity is enhanced by the incorporation of a high-performance CMOS sensor, which performs exceptionally well in low-light conditions, thereby allowing for around-the-clock monitoring without significant loss of quality.

The camera also boasts a built-in noise reduction technology, ensuring that the captured images remain clear and sharp, even in challenging lighting situations. Additional features such as Wide Dynamic Range (WDR) technology allow the camera to handle scenes with high contrast effectively. This technology minimizes washout in brightly lit areas while maintaining detail in darker regions, providing a balanced view of the surroundings.

The Samsung SHC-740N/P is designed with user-friendliness in mind. It supports multiple video output formats, including analog and HD-SDI, making it compatible with various monitoring systems. The camera’s compact and robust design allows for discreet installation, whether on walls or ceilings, ensuring it seamlessly integrates into its environment.

Another key characteristic is its durability. Constructed to withstand various weather conditions, the SHC-740N/P is often equipped with IP66-rated housing, providing it with protection against dust and water ingress. This durability makes it an ideal choice for outdoor surveillance needs.

Furthermore, the camera features advanced motion detection capabilities, allowing users to receive alerts when unexpected movement is detected. This functionality enhances security and ensures rapid response times in case of any incidents.

In conclusion, the Samsung SHC-740N/P is an innovative surveillance solution that combines high-definition imaging, advanced technological features, and robust construction. Its versatility and performance make it an excellent choice for anyone looking to enhance their security infrastructure. As security challenges continue to evolve, the SHC-740N/P stands ready to meet the demands of the modern surveillance landscape.