23
Using the Answering Machine (Pro800 Only)
Answering Machine (Pro800 Only)
Youransweringmachinecanbereadyforusewithina
few seconds of plugging in the telephone line cord and
switching on the mains power.
Justfollowthestepsinthissectiontosetupanduse
your answering machine.
Switch on/off
Switches the answering machine on
or off. The current answer mode is
announced.
Set the answer mode
Switch the answering machine on
2 sec  Tochangethemodebetween"Answer&
Rec." and "Answer Only"
Record your outgoing message (OGM)
Your answering machine comes with a default outgoing
messagebutyoucanrecordyourownpersonalOGMof
up to 2 minutes long.
2 sec  Recordyourmessageafterthebeep
Press to end your recording
Check your OGM
 ThecurrentOGMisannounced
Toreturntothefactory pre-setOGM,justpress the
keywhilstthecurrentOGMisplaying.
Set the answer delay
2 sec
(Underbase)
Enters ring delay mode and announces
the current setting.
 Selectbetween2-9 ringsor "Time
Saver".
 Confir mth enu mber or rings (2-9 )or
"Time Saver".
Time saver: This feature can save you the cost of a
call when you ring in to listen to your messages from
another phone. If your answering machine answers
after 2 rings you have new messages, if it answers
after5 ringsthenthere areno newmessages.Hang
upafter the2ndring andyou willnotbe chargedfor
the call.
Pro_600_800.indd 23 2008-11-11 16:17:41