Oricom pro800 DECT, pro600 DECT Using Remote Access Pro800 Only, PIN Code for remote access

Using Remote Access (Pro800 Only)

Remote Access (Pro800 Only)

You can call your answering machine from any TouchtoneTM phone or mobile phone whilst you are away from home to listen to your messages.

PIN Code for remote access

A 3-digit PIN code is required for remote access to your answering machine. The default code is "000" but for security reasons you should change this to a code personal to you.

Changing the PIN code

2 sec PINCODE	Announces the current security code
(Under base)	and prompts for 1st digit
	Select the 1st digit

Confirm the digit

Select the 2nd digit

Confirm the digit

Select the 3rd digit

Confirm the digit. Your new security code will be announced.

Press the key at any time to exit from changing the PIN code and return to standby. The PIN code will then remain unchanged.

Call in to check your messages

Dial your own phone number and wait until the answering machine picks up the call.

2 x, ,	Switch to remote access and enter your
	3 digit PIN code after the voice prompt.

If you enter your PIN code incorrectly, the answering machine will hang up the call.

If you enter your PIN code correctly you can now remotely control your answering machine by using the digits on the keypad.

26

Pro_600_800.indd 26

2008-11-11 16:17:43