Connection 
3.Remove the cover from the iris lens plug supplied, and solder the lens cable to the plug as shown below.
• Video type : | • DC type : | |
No. 1 Pin | No. 1 Pin | |
No. 2 Pin | No. 2 Pin | |
No. 3 Pin | No. 3 Pin | |
No. 4 Pin | No. 4 Pin | |
| Lens cable |
No. 3 | Pin |
No. 1 Pin | connector |
| No. 4 Pin |
| No. 2 Pin |
4.Remove the protective cap, and attach the lens to the camera by turning clockwise.
5.Connect the lens plug to the auto iris connector on the right side of the camera.
6.Set the DC/VIDEO selection switch to DC or VIDEO according to the type of the lens.
Installing C/CS-Mount lens
Before mounting a lens, please check whether it is a
•Mounting a CS-Mount lens
After removing the protecting cap, attach the lens into the camera by turning clockwise.
Notes
Use the lens under the specification as shown. Otherwise the lens can damage the camera or abnormal fixing may result.
A heavy lens may disturb the balance with the camera and possibly result in damage. Don't use a lens heavier than 450g.
It is recommended to set the lens ALC mode to Av mode (Average). Pk mode can be occurred hunting.
COLOR CCD CAMERA 16 User’s Manual | COLOR CCD CAMERA 17 User’s Manual |