Introduction
n Input/Output Connector | CO | ||||||||
| This connector has input and output ports for, DAY/NIGHT switching, | CO | |||||||
| and alarm output signals. |
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No. | Function | Description | |
|
|
| |
1 | ALARM OUT | Alarm out port for motion detection. (Open collector type) | |
2 | GND | Grounding Port. | |
3 | TRIGGER IN | Displays the current still image when it receives the Trigger signal. | |
(Normal Open Type) | |||
|
| ||
4 | SHUTTER (S0) | This is a port for selecting an external high speed shutter mode. | |
If connected in LOW (0V), it will become ON inside. | |||
|
| ||
5 | SHUTTER (S1) | This is a port for selecting an external high speed shutter mode. | |
If connected in LOW (0V), it will become ON inside. | |||
|
| ||
6 | SHUTTER (S2) | This is a port for selecting an external high speed shutter mode. | |
If connected in LOW (0V), it will become ON inside. | |||
|
| ||
7 | 5V OUT | Use within typical DC +5V 100mA | |
|
|
|
oSETUP Switch
This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears.
ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.
cd (Up/Down) : By pressing this switch up or down, you can move up or down on the menu.
: When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press this button.
pPower Display LED
When the power is normally connected, the red LED lights.
qVideo OUT Port
This is connected to the Video Input Port of the monitor and it outputs the Video signals.
rGND
This is a grounding port.
sPower Connection Port
This is connected to the Power cable.
10 – DIGITAL COLOR CAMERA
Conn the A
P
N
1
2
3
4
No
–