Samsung SCC-B2031P, SCC-B2331P user manual AGC OFF, Very LOW, LOW, MID, HIGH, Very HIGH, User

How to use OSD Menu

sign

ct

.

he

LC- e

e of

The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it.

②If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.

you can set the desired BLC zone by defining the size and location.

		‹ALC‹
LENS				DC
LEVEL			[00]----I----
	BACKLIGHT			BLC
	AREA			USER
	<SIZE>￿
	<LOCATION>￿
￿		￿		￿

If you use an ordinary camera in a scene with an intensive backlight, the object will be displayed dark on the monitor affected by the backlight. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.

–

•ELC (Electronic Light Control)

①If you press the SETUP switch when the ELC￿ submenu is selected, the corresponding screen appears. You can make the ELC (Electronic Light Control) function active or not.

‹ELC‹

LEVEL [00]----I----

BACKLIGHTOFF

BLC area.

	‹ELC‹
LEVEL	[00]----I----
BACKLIGHT		BLC
AREA		USER
<SIZE>￿
<LOCATION>￿
￿	￿	￿

❖ AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER]
The AGC (Auto Gain Control) menu is used to
set the AGC level of the camera. When the AGC
is active, the camera automatically increases the	ENG
sensitivity by amplifying the Video signal when
the strength of the signal falls below the normal
value.
If OFF mode is selected in the SENS-UP menu,
you can specify the AGC level.
If you press the SETUP switch with a USER
sub menu selected, you will see the appropriate
screen.

‹AGC USER‹

LEVEL[16]

￿ ￿ ￿

In USER mode, you can break down the level in 16 steps from VERY LOW to VERY HIGH to your preference.

or a O-

￿ ￿ ￿

②In similar to ALC setting, you can specify the

English – 17