Samsung S1000 user manual Movie Clip frame stabiliser, + / button

Movie Clip frame stabiliser

This function helps stabilise images captured during movie recording.

1.Press the E button in the Movie clip mode.

2.Press the Left / Right buttons to select the

stabilizer menu tab.

3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
-	: Movie clip frame stabiliser function		Stabilizer
	becomes disabled.
-	: Prevents camera shake during movie recording.
	The recording frame range will become narrower than when you
	select the	menu. Pre-view frames may not display smoothly

on the LCD monitor.

+ / - button

You can use the + / - button to adjust the values for the RGB, ISO, white balance and exposure compensation.

Main menu	Sub menu	Available camera mode
RGB	R (Red), G (Green), B (Blue)
ISO	AUTO, 80, 100, 200, 400, 800, 1000
	AUTO, DAYLIGHT, CLOUDY,
WHITE BALANCE	FLUORESCENT H,
	FLUORESCENT L, TUNGSTEN,
	CUSTOM.
Exposure compensation	-2.0~0.0~+2.0 (0.5EV steps)

+ / - button

RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be captured.

Setting RGB Values

1. Press the + / - button, and then use the UP and

DOWN buttons to select the RGB icon ( ). The RGB menu bar will appear as shown.

2. Use the UP / DOWN / LEFT and RIGHT buttons to select the desired RGB value.

-Up / Down Button : Navigates between R, G, and B icons.

-Left / Right Button : Changes value of each icon.

3.When you press the + / - button again, the value you set will be saved and RGB setup mode will end.

When special effect (colour) from the icon other than is selected, it will not be able to select the RGB.

29