Samsung S1000 user manual Metering, Continuous shot

METERING

Multi

Spot

[ PROGRAM mode ]

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

- Multi : Exposure will be calculated based on an average of the available light in the image

area. However, the calculation will be biased towards the centre of the image

area. This is suitable for general use.

- Spot : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the

centre is exposed correctly, regardless of the back lighting.

If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.

Continuous shot

You can select continuous shot, and AEB (Auto Exposure Bracketing).

- Single	: Take one picture only
- Continuous : Images will be taken continuously until
			SHOOTING
	the shutter button is released. The				Single
				Continuous
	shooting capacity depends on the
					AEB
	memory.
- AEB	: Take three pictures in a series in
	different exposures: standard	[ PROGRAM mode ]
	exposure(0.0EV), short exposure

(-0.5EV) and over exposure (+0.5EV).

Use the mode if it is hard to decide exposure of the object.

High resolution and picture quality increases file saving time, which increases stand-by time.

If the [Continuous] or [AEB] sub menu is selected, the flash will be off automatically.

If less than 3 pictures are available in the memory, the AEB shooting is not available.

It is best to use a tripod for the AEB shooting as the time to save each image file is longer and the blurring caused by camera shake may occur.

34