Samsung TL110 manual Connecting to a Power Source, BP70A rechargeable battery Specification

Connecting to a Power Source

You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera.

BP70A rechargeable battery Specification

Model			BP70A
Type			Lithium lon
Capacity			740mAh
Voltage			3.7V
Charging time			Approximately 150 Minutes
Number of images and battery life: Using the BP70A
		Battery life /			Conditions
	Number of images
					Using the fully charged battery,
					Default settings, Program mode,
	Approx. 100 MIN /				Shot to shot interval: 30Sec.
Still image				Changing the zoom position between
	Approx. 200 shots				the Wide and the Tele after every shot.
					Using the flash on every second shot.
					Using the camera for 5 minutes and
					then powering it off for 1 minute.
					Using the fully charged battery
Movie	Approx. 80 MIN				640x480 image size
					30 fps frame rate

ÄThese figures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods.

Important information about battery usage. When camera is not in use, turn off the power.

Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.

Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures.

During extended use of the camera, the camera body may become warm. This is perfectly normal.

If you connect the AC adapter to the USB cable, you can use it as an AC cable and recharge the spare battery with it.

- Using an AC cable

: Connect the AC adapter to the USB cable. It can be used as a power cable.

- Using a USB cable

: Remove the AC adapter.You can download stored images to your PC (p.100) or supply the power to your camera through the USB cable.

12