Samsung TL110 manual Drive mode

Shooting ( )

ACB

Drive mode

This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly.

ACB

BackMove

You can select single, continuous, motion capture, and AEB (Auto Exposure Bracketing).

[Single] (	)	: Take one picture only.
[Continuous] (		) : Images will be
		taken continuously
		until the shutter
		button is released.	Drive
[Motion Capture] (		) : This takes 6 shots

- [ACB] Sub menus: [Off], [On].

ÄWhen using the [Program] mode, the ACB function will operate.

		per second, when	Back	Move
		the shutter is pressed and held down. After
		completing the continuous shooting, images
		are saved and the images play back on the
		Rear LCD. The maximum number of shots is
		30 and the image size is fixed as VGA.
[AEB] (	)	: Take three pictures in a series in different
		exposures: standard exposure (0.0EV),
		short exposure (-1/2EV) and over exposure
		(+1/2EV).

High resolution and picture quality increases file saving time, which increases stand-by time.

If the [Continuous], [Motion Capture], [AEB] sub menu is selected, the flash will be off automatically.

If less than 3 pictures are available on the memory, the AEB shooting is not available.

It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.

51