Tokina APT-641 manual Front Panel Front Panel Controls, Rear Panel Rear Panel Controls, Near/Far

APT-641 Speed dome controller

SPECIFICATION

Video Input	8 CAMERA INPUT and EACH THROUGHOUT
Video Output	MAIN OUTPUT/SPOT OUTPUT
LCD Display	16 x 2 Display
Alarm Input	up to 8 Inputs
Preset	64 Preset Points
OSD Display	MENU and CAMERA ID (up to 10 characters)
Function Key	AUTO/AUTO PAN/SWITCHER
Focus	NEAR/FAR
Joystick	PAN/TILT/ZOOM Simultaneous Control
VSD-640	RS-485 Communication Interface
External Units/PC	RS-232 Communication Interface
Power Source	DC 12V (500mA)
Power Consumption	6W
Weight	2kg
Dimensions	345(W)x67(H)x206(D)mm

* Specifications and design subject to change without notice for improvements.

TOKINA Co.,Ltd.

Security Products Division

120-4 NOZUTA-MACHI,MACHIDA-SHI, TOKYO, 195-0063 JAPAN TEL:+81-42-734-8912 FAX:+81-42-736-0143 E-mail:cctv@tokina.co.jp

Front Panel Front Panel Controls

	1. LCD DISPLAY
	This presents the setting state.
	2. KEYPAD BUTTON
	This button is used to control PRESET and CAMERA.
	3. CLEAR
	This button is a STOP function button.
	4. ENT
	This button is a ENTER button that selects PRESET and CAMERA.
	Besides this button is used the button selects cameras of external unit.
	5. PRESET
	This button is a PRESET button that selects preset positions.
	6. CAM
	This button is a CAMERA button that selects cameras and
	applys switcher function.
	7. REW
	This button is a REWIND button for AUTO/AUTO PAN.
	8. FF
	This button is a FORWARD button for AUTO/AUTO PAN.
	9. AUTO
	This button is AUTO Sequence and SWITCHER button.
	10. AUTO PAN
	This button is AUTO PAN button.
	11. FAR
Rear Panel Rear Panel Controls	This button is a Far button for manual focus.
	12. NEAR
1. VIDEO INPUT JACKS	This button is a NEAR button for manual focus.
This jack is used as video input jacks up to eight video inputs.	13. MENU
2. EACH THROUGH OUTPUT JACKS	This button is a MENU button for OSD Display.
This jack is a Throughout jack of each video input.	Be sure to push the button over 3 sec to operate MENU.
3. VIDEO OUTPUT JACKS	14. CAM SW/IR
This jack is used as the output of video input.	This button is CAM SW button for VRX-2201 and IR button.
Outputs consists of two outputs, AUTO and SPOT output.	15. LIGHT/WDR
4. ALARM INPUT TERMINALS	This button is LIGHT button for VRX-2201 and WDR button.
This terminal is used as ALARM inputs.	16. AUX
5. RS-485 TERMINAL	This button is an AUX button for VRX-2201.
This terminal is used as RS-485 Communication.	17. LOCK
6. PC	This button is a LOCK button for preventing the preset setting from mishandling.
This D-SUB Jack is used to control this unit by PC.(OPTION)	Be sure to push the button over 3 sec to operate LOCK.
7. EXTERNAL UNITS	18. JOYSTICK
This D-SUB Jack is used to connect the external unit.	This is a Joystick that manually controls PAN/TILT/ZOOM.
8. DC POWER JACK	19. POWER SWITCH
This jack is a DC Power jack, DC 12V.	This switch is a POWER ON/OFF button.