Metz 44 MZ-2 instruction manual Troubleshooting, Maintenance and care, Technical data

Page 20

16. Troubleshooting

Should the LC display indicate meaningless information or should the flash unit not work properly in the individual modes, then switch off the mecablitz for about 10 seconds by its main switch. Check the camera settings and find out if the flash unit’s foot is correctly mounted in the camera’s accessory shoe.

The mecablitz must operate properly when it is switched on again. Contact your local dealer should this not be the case.

17. Maintenance and care

Remove any grime and dust with a soft, dry or silicon-treated cloth. Never use detergents that could damage plastic parts.

Forming the flash capacitor

The flash capacitor incorporated in the flash unit undergoes a physical change when the flash unit is not switched on for prolonged periods of time. For this reason it is necessary to switch on the mecablitz for approx. 10 minutes every 3 months (see Chapter 2.4). The batteries must supply sufficient power for flash

￿readiness to be indicated within 1 minute after the mecablitz was switched on.

18. Technical data

Max. guide number at ISO 100 / 21°; zoom 105 mm:

Metric system: 44 Imperial system (ft): 144

Flash modes:

TTL

Automatic (12 auto aperture at ISO 100 / 21°):

f/1 - f/1.4 - f/2 - f/2.8 - f/4 - f/5.6 - f/8 - f/11 - f/16 - f/22 - f/32 - f/45

Manual (8 partial light output levels)

Sensor coverage angle: approx. 25°

Flash durations:

approx. 1/200 s... 1/20000 s in TTL mode In manual flash mode M:

at 1/1 (full) light output approx. 1/200 s

at 1/2 light output approx. 1/600 s

at 1/4 light output approx. 1/1500 s

at 1/8 light output approx. 1/3000 s

at 1/16 light output approx. 1/5000 s

at 1/32 light output approx. 1/8000 s

at 1/64 light output approx. 1/13000 s

at 1/128 light output approx. 1/20000 s

at 1/256 light output approx. 1/26000 s

Colour temperature: approx. 5600 K

Film speed:

ISO 6 to ISO 6400

Synchronisation:

Low voltage ignition

86

Image 20
Contents Mecablitz 44 MZ-2 Manual de instruccionesSafety instructions Overview of the flash functions Operating conceptManual flash exposure correction 132Safety instructions ForewordOverview of the flash functions SCA 300-AdapterPreparing the mecablitz for use Switching the flash unit on and off Automatic switch-off function / Auto OFF FigSelecting and setting the flash modes TTL / a / M Selecting and setting the flash parametersSelecting and setting special functions TTL flash mode FigPortrait, sports, etc., Manual Mode M, etc Operating modes of the mecablitzMatrix controlled TTL fill-in flash with Nikon cameras Automatic flash modeAutomatic fill-in flash in daylight Value of -1 EV f-stop to -1.7 EV see Chapter Fill-in flash in automatic modeManual flash mode Flash parameters of the mecablitz Aperture Automatic aperture adaptation Manual aperture adaptationManual flash exposure correction in TTL flash mode Manual flash exposure correction in automatic flash mode aSetting procedure ISO film speed Automatic adaptation of the ISO film speedCancelling the correction value Setting a manual partial light outputAutomatic switch-off function Special functions of the mecablitzSlow synchronisation / Slow 2 2nd curtain synchronisation Rear mode FigExtended zoom mode Flash readiness indication Correct exposure confirmationManual adaptation of maximum flash range indication Maximum flash range indication in the manual flash mode MLC display of the mecablitz AF measuring beam Exceeding the capacity of maximum flash range indicationBlanking out the maximum flash range indication Changing from meter to feet m ftReturning to the basic setting of the mecablitz Slave mode in the cordless Metz Remote SystemFlash techniques Bounce flashDeactivating the slave mode Optional extrasTroubleshooting Maintenance and careTechnical data Automatic 12 auto aperture at ISO 100Errors excepted. Subject to changes Disposal of batteries106 111 107 119 124108 120 133 139 120 134 148 15610,3 10,5 11,780/20 10,5 11,8 10,1Selettore del modo di funzionamento Tasten für WertverstellungPage Sensor Page Hinweis Uitzonderlijke gevallen kan aanra- ken leiden703 47 0114.A1 Consumer electronics Photoelectronics Plastics technology

44 MZ-2 specifications

The Metz 44 MZ-2 is a highly regarded flash unit that has found its place in the toolkit of both professional photographers and enthusiasts alike. Known for its versatility and advanced features, this flash unit has become a staple in the world of photography.

One of the standout characteristics of the Metz 44 MZ-2 is its powerful output capability, boasting a guide number of approximately 44 at ISO 100. This allows for effective illumination over considerable distances, making it an excellent choice for indoor and outdoor photography. The adjustable zoom head of the flash can adapt to different focal lengths, allowing for optimal illumination based on the photographer's needs. With zoom settings from 24mm to 105mm, it helps in controlling the spread of light depending on the lens being used.

The Metz MZ-2 is also recognized for its flexibility. It features a dual power source option, which includes both rechargeable batteries and AA batteries, making it convenient for photographers on the go. The quick recycling time is another highlight, allowing photographers to capture multiple shots in rapid succession without missing critical moments.

In terms of technology, the MZ-2 is equipped with advanced TTL metering capabilities compatible with a variety of camera brands. This feature automatically adjusts the flash output based on the camera's exposure settings, ensuring perfect exposure in different lighting conditions. Additionally, the flash supports multiple modes, including manual control and multi-flash settings, allowing for creative lighting techniques, such as stroboscopic photography.

The user-friendly interface of the Metz 44 MZ-2 enhances the overall experience. This flash unit boasts an intuitive control panel with a clear LCD display, making it easy to navigate through settings. Furthermore, the ergonomic design ensures a comfortable grip, which is vital during long shooting sessions.

Constructed with a sturdy build, the Metz 44 MZ-2 is designed to withstand the rigors of regular use. Its durable materials ensure longevity while maintaining a lightweight profile, which is advantageous for photographers who require mobility.

In summary, the Metz 44 MZ-2 is an advanced, powerful, and reliable flash unit that caters to a multitude of photographic needs. With features such as high guide number, adjustable zoom, TTL capabilities, fast recycling time, and dual power options, it continues to be a preferred choice among both amateurs and professionals seeking to enhance their photography with effective lighting solutions.