Sealife DC 600 manual Setting the Self-timer, Self-timer mode Description 10s

Setting the Self-timer

This setting allows images to be captured with the self-timer.

1.Slide the mode switch to [ ] or [ ].

2.Toggle the button to select the setting.

For the [ ] mode.

OFF	[	10s]		10 sec.	[	2s ]		2 sec.
		[	10+2s ] 10+2 sec.
For the [				] mode.
OFF	[		10s	] 10 sec.	[	2s	]	2 sec.

3.Compose the image, press the shutter button down halfway, then press it down fully.

The self-timer LED flashes and the image is captured after the preset time has elapsed.

The countdown is displayed on the LCD monitor.

To cancel the self-timer during operation, press the shutter button halfway.

The table below will help you choose the appropriate self-timer mode:

Self-timer mode			Description
[	10s]	10 sec.	The image is captured about 10 seconds after the
			shutter button is pressed.
[	2s]	2 sec.	The image is captured about 2 seconds after the
			shutter button is pressed.
[	10+2s]10+2 sec.		One image is captured about 10 seconds after the
			shutter button is pressed, and the other image is
			captured again after 2 seconds. This is convenient
			when capturing two images in succession.

User’s Manual >>

33