Samsung EC-TL90ZZBPR PictBridge Reset Important notes, Areas exposed to dust and dirt, Weather

Page 83

PictBridge : Reset

Important notes

Initialises user-changed configurations.

1.Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button.

2.Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.

Date

:Auto

File Name

:Auto

 

 

Reset

NoNo

 

 

Yes

 

 

 

 

Back

Set

Be sure to observe the following precautions!

This unit contains precision electronic components. Do not use or store this unit in the following locations.

- Areas exposed to severe changes in temperature and humidity.

- Areas exposed to dust and dirt.

- Areas exposed to direct sunlight or the inside of a vehicle in hot

weather.

- Environments where there is high magnetism or excessive vibration.

If [Yes] is selected : All print and image settings will be reset.

If [No] is selected : Settings will not be reset.

ÄDefault print setting varies depending on the printer manufacturer. For your printer’s default setting, refer to the user’s guide that came with your printer.

- Areas with high explosives or highly flammable materials.

Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothballs), high temperature and high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time

Sand can be particularly troublesome to cameras.

-Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand.

-Doing so may result in failure or may permanently render the camera unusable.

Handling the camera

-Never drop the camera or subject it to severe shocks or vibrations.

-Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case.

-Avoid obstructing the lens or the flash when you capture an image.

-This camera is not waterproof.

To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.

82

Image 83
Contents Page Getting to Know your camera InstructionsPage Contents 039 Frame Guide 041 Image Adjust045 Volume Drive mode 047 Quick view048 Formatting a memory 049 Setting up the Date / Time / Date type052 Setting the USB 047 Display SaveSmart Mode Sold Separately System chartPackage Contents Microphone Identification of featuresFront & Top Back Camera status lamp Mode switch LCD monitorFunction button Delete button Menu button Play mode button Button Battery chamber Information / Up buttonBottom Function button Mode icon Self-timer lampNumber of images and battery life Using the SLB-07A Connecting to a Power SourceSLB-07A rechargeable battery Specification Charging LED How to charge the rechargeable batteryCharging LED of the AC Adapter Insert the memory card as shown BatteryInserting the memory card When the memory card is used incorrectly Instructions on how to use the memory cardStill Image Movie Clip About Card pinsWrite protect switch Label SD Secure Digital memory card Fine Normal 30 FPS 20 FPS 15 FPS00001 LCD monitor indicatorDescription Icons Digital Zoom rateUse the left or right buttons to select a sub menu How to use the menuUse the up or down buttons to navigate through the menus Selecting modes Starting the recording modeHow to use the Program mode Program modeFrame Rate How to use the Movie clip modeRecording the movie clip without sound Movie clip file type AVI MPEG-4Pressing the shutter button down half way Pausing while recording a movie clip Successive RecordingThings to Watch Out for When Taking Pictures Power buttonSmart button Mode switchNormal mode Shutter buttonDigital zoom Wide Zoom W/T LeverInfo Disp / Up button Macro Available focusing method, by recording modeMacro / Down button Down button to take macro picturesNormal Macro Auto macro Focus lockFlash / Left button Flash rangeSmart Auto flash icon will appear in Smart Auto mode Flash mode indicatorUse a tripod to prevent the camera from shaking Self-timer / Right buttonAvailable flash mode, by recording mode Selectable Selecting the self-timerDo not move Taking an image after 2 sec Motion TimerStarting Functions Available modeMenu button OK buttonExposure compensation How to Enable Functions Using the Menu ButtonFor taking images under a cloudy White balanceIcon Description For taking images outsidePress the shutter button fully to take a picture Face DetectionOr subject brightness This function can detect up to 10 persons Digital zoom is not activated in this modeWhen the person being taken does not look at the camera Blink Detection Image SizeSmile Shot Fine Mode Still Image modeQuality / Frame rate ACB Sub menus Off, OnMetering Drive modeFrom the 9 AF points Set Frame Guide mode when you wantFrame Guide Auto Focus typePhoto Style Selector Image Image AdjustUp/Down button Left/Right buttonSelect this menu only in the Movie clip Movie clip frame stabiliserDigital Image Stabilization DIS This function helps stabilize imagesAllows Voice MemoVoice Recording Available recording time Max hourRecording the movie clip without voice Beep Sound Volume Shutter soundSound menu Sound Function Description Setup menuDisplay LanguageDisplay Save Start up imageQuick view Display BrightInitialisation SettingsNo* Settings will not be restored to their defaults Formatting a memoryTime Zone Setting up the Date / Time / Date typeFile name Date Only the Date will be Auto power offImprinting the recording date There is an option to include Date / Time on still imagesOff The AF lamp will not light up in low light conditions Connecting to an external monitorAuto Focus lamp Selecting Video out type On* The AF lamp will light up in low light conditionsSetting the USB It back, press the OK button again Starting play modePlaying back a still image Playing back a movie clipPlaying back a recorded voice Movie clip capture functionOn/Off Playing back a voice memoTo resume playback of the voice memo, press the OK button 100-0010Smart Album Play mode buttonPress the Play mode button once to Thumbnail º / Enlargement í LeverRecorded dates Searching or Deleting FilesDetails of Each Category Description File FormatSelect a desired sub menu by Image enlargementButton. Press the OK button and a Message will be displayedResumes playback Play & Pause / OK buttonVoice file, or a movie clip Temporarily stops playbackDelete Õ button Left / Right / Down / Menu buttonSetting up the play back function using the LCD monitor Menus are subject to change without prior notice 4X6 SizeLayout Resize EditChanged image is saved as a new file name Rotating an imageYou can rotate the stored images by various degrees SelectorFace Retouch Custom colourButton and press the OK button New file nameBy pressing the Left/Right Change the brightness by pressing the Left/Right buttonButton and press the OK button. Then Change the saturation by pressing the Left/Right buttonStart the Multi Slide Show Repeat The Slide show is repeated until cancelledView Starting the Multi Slide Show Selecting Images Configure Multi Slide show effectsDeleting images Setting play intervalSetting Background Music File OptionsOK button Protect / release the image Protecting imagesYou can add your voice to a stored still image Reset Cancel the print setup When the wide angle image is printed as a wide angle printZoom W/T Lever Change the print size Press the OK button to confirm the setting DisplayDpof Size secondary menu Cancel, 3X5, 4X6, 5X7 Press the Right button Copy To CardSmart Auto mode Smart modeSmart mode display ÄWhen you press the Smart button, it will turn blue000000 Starting Smart modeUse the Smart button to select Smart Auto mode How to use Smart Auto modeUse the Smart button to select Smart Movie Clip mode Setting up the Smart menuHow to use Smart Movie Clip mode Main Menu Sub Menu 30 FPS15 FPS Setting up the Smart Play menu Smart Play mode displaySetting up the Smart Play menu PictBridge PictBridge Picture Selection PictBridge Print SettingSand can be particularly troublesome to cameras PictBridge Reset Important notesAreas exposed to dust and dirt WeatherSamsung cannot be held responsible for camera malfunctions Extremes in temperature may cause problemsDo not attempt to disassemble or modify the camera Memory card is locked There is low battery capacity Insert fresh batteriesInsert fresh batteries. p.14 Before contacting a service centreRefer to Card Locked error message The cameras power is off Please check the followingCheck the connection The camera is off Turn the camera onSpecifications Movie Clip ·With Audio or without Audio SD card Up to 4GB guaranteedInterface Digital output connector USB Audio Mono DC power input connector 4.2720mAh Power SourceDimensions WxHxD WeightSystem Requirements Software NotesAbout the software You can visit the Samsung web-site through the internet Setting up the application softwareCamera Installer menu Auto run frame Setting up the application software Setting up the application software Starting PC mode Refer to page 97 Removing the removable disk Downloading stored imagesConnect the camera to your PC with the USB cable Select an image and press the right mouse buttonCut Unplug the USB cable Removing the removable diskClick the Start button to download the images Samsung MasterClick Next button Downloaded images will be displayedImage selection window You can select the desired images AdjustThis window Help menuAdd Media Edit ClipSaturation Windows media asf file types101 Right-click on the entry with the question ? or exclamation Case 5 Are other USB cables connected to the PC?Insert the CD provided with the camera Installing codec for Mac OSTelephone No SAMSUNG726-7864 FCC noticeModel No Address