PLAY MODE
# of prints
This function allows you to embed print quantity information on your memory card.
Images can then be printed on DPOF printers, or at an increasing number of photo laboratories. This function is not available for Movie clips.
The DPOF file is only stored on the card.
Setting up the number of prints
1.Turn the camera power on.
2.Select the PLAY mode by rotating the mode dial.
3.Do not turn the LCD monitor off.
4.Select an image that you want to print quantities of by
pressing the UP( )/ DOWN ( ) button.
5.Press the MENU button to display the menu on the LCD monitor.
6.Press the UP( 
)/ DOWN (
) button and select [# OF PRINTS].
7.Press the SET(
) button and the sub menu will display.
8.Select the number that you want and press the SET(
) button to confirm the setting.
9.Print the setting indicator and the number of prints will be displayed on the LCD monitor after pressing the SET button. Selectable the number of prints : 0 ~ 9
(If you select ‘0(zero)’, you can’t print an image.)
PLAY
DELETE |
|
SLIDE SHOW | 2 SEC |
PROTECT | UNLOCK |
|
|
# OF PRINTS | X0 |
|
|
EXIT:MENU CHANGE:
PLAY
# OF PRINTS
X1
EXIT:MENUSET:
66