SETUP MODE
POWER OFF
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage.
You can set the power to switch off at any specified time( 1 ~ 10MIN, 1MIN interval) from the last operation.
If you select [CANCEL], the power off function will not operate.
Note that the automatic power off does not operate if the camera is in slide show or playing a movie clip.
1.Turn the camera power on.
2.Select the SETUP mode by rotating the mode dial.
3.[SETUP 1/2] menu will be displayed.
4.Press the UP (
)/ DOWN (
) button and select [POWER OFF].
5.Press the SET(
) button and the sub menu will be displayed.
6.Select the desired sub menu by pressing the UP(
)/ DOWN
(
) button. Press the SET( ) button to confirm the setting.
7. The default is [1 MIN].
SETUP | 1/2 |
BEEP | ON |
POWER OFF | 10 MIN |
DATE IMPRINT | ON |
DATE TYPE | YMD |
MOVE PAGE: | |
|
|
SETUP | 1/2 |
BEEP | ON |
|
|
POWER OFF | 10 MIN |
DATE IMPRINT | ON |
DATE TYPE | YMD |
CHANGE:
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off setting will be preserved.
SETUP 1/2
POWER OFF
10 MIN
EXIT:MENUSET:
68