Nextar N1-506 quick start You are now ready to transfer images to and from your unit

5.After double clicking this icon, the following screen should appear:

6.Follow the on-screen prompts to install the software. Accept all the “defaults” that the program suggests (if you are experienced in installing software you can customize your install)

You are now ready to charge your Keychain Photo Album.

1.Using the included cable, plug the cable into your PC first, and then into your Mini Photo Album.

NOTE: YOUR PHOTO ALBUM MUST BE FULLY CHARGED BEFORE USING IT. THIS CHARGING TIME IS TYPICALLY 2-3 HOURS

2.When the unit if first plugged in to your PC, the following screen appears:

There will be blinking battery icon in the lower left hand corner. This icon will stop flashing once your unit is fully charged

3.Once the unit is fully charged, unplug it from your PC and turn it off using the ON/OFF switch on the side of the unit.

4.With the unit off, plug it back into your PC (using the same procedure as #1).

5.You will see the following screen:

Using the DOWN navigation button on the side of the unit, move the cursor down to the USB Update position:

Then press the MENU (top) button to select the Update mode. The following screen will appear:one photo that you download to the unit:

You are now ready to transfer images to and from your unit.