Vivitar 3765 instruction manual Appendix 2 Troubleshooting Guide

			Appendix 2 – Troubleshooting Guide
When using	When removing	Procedure:
Windows ME	USB devices, it is	A.	Right-click the Unplug or Eject hardware icon at
or 2000 I get a	recommended that		the bottom-right of your computer screen.
message:	users follow the	B. Left-click the Unplug or Eject hardware text box
"Unsafe	"Safe Removal of
			to open the 'Unplug or Eject Hardware' screen.
Removal	USB Device"
		C. From the 'Unplug or Eject Hardware' screen,
Device	procedure.
			select the device to be disconnected and then
Detected"
			click the Stop button to bring up the 'Stop a
whenever the
			Hardware device' confirmation screen.
USB cable is
		D. From the 'Stop a Hardware device' confirmation
unplugged
			screen select the device to be stopped and click
from the PC
			OK to bring up the 'Safe To Remove Hardware'
			confirmation.
		E. Disconnect the Digital Camera from your PC.
Images lose	If your hard disk's	Please check to make sure your hard drive's DMA
formatting data	DMA setting is	setting is enabled, as follows:
during image	turned off images
capture in "PC	may lose formatting	1.	From the Windows Start menu, select Settings,
Camera"	data during image		then Control Panel.
mode.	capture. (Windows
		2.	In the Control Panel double-click System, then
	98 and ME only.)
			click the Device Manager tab.
		3.	Select your hard drive from the list, then click
			Properties.
		4.	Click the Settings tab.
		5.	Make sure the box marked DMA is checked. If
			not, check the box to ensure that your hard
			drive will protect image attributes during
			capture.

51