Pandigital PAN80XXT manual Network Photo, Set the Internal Clock, Set the Alarm

Page 11

Set the Internal Clock

When the Digital Photo Frame’s internal clock is set, you can use it as an alarm clock.

1.To set the internal clock, choose CLOCK from the HOME screen to enter CALENDAR/CLOCK screen then press SETUP to open the Setup menu by remote control.

2.Choose Set Clock.

3.Use the RIGHT or LEFT arrow to move to a time or date field to be changed.

4.Use the Up and Down arrows to change the value in the selected field.

5.When the date and time are correct, press the ENTER button to set the time and return to the SETUP screen. Press EXIT to close the Setup menu.

Set the Alarm

Use your Digital Photo Frame as an alarm clock. You can set it to alarm with a built-in tone or playing a pre-stored MP3 music in the build-in memory. You can also set the alarm to alert only once or daily after setup.

1.To set the alarm clock, choose CLOCK from the HOME screen to enter CALENDAR/CLOCK screen then press SETUP to open the Setup menu by remote control.

2.Choose Set Alarm.

3.Use the Left and Right arrows to move through the selection fields and the Up and Down arrows to scroll through the values (time, alarm type or alarm tone/music etc).

4.When finish, press Enter button to set the alarm. Press EXIT to close the menu.

Create a Schedule for Playing Slideshows

You can set your digital photo frame to display slideshows at predetermined times.

1.To set ON/OFF Schedule and press SETUP button in HOME screen by remote control.

2.Use the Arrow buttons to select ON/OFF Schedule and press SELECT.

The Set Schedule page opens with the Hours field for the Weekdays Turn on at highlighted.

3.Use the Up or Down arrow to set the hour you want scheduled slideshows to start (turn on at), then use the right arrow to move to the minutes field, set the minutes in the same manner as the hours, and then move the highlight to

20

the AM/PM field.

4.Use the Up or Down arrow button to choose AM or PM.

5.Set the time you want the slideshow to end (turn off at) in the same manner.

6.Press the Enter button when Always OFF is highlighted if you don’t want to play scheduled slideshows on weekdays. The field now reads Set Turn-On Time. Press the Enter button to schedule weekday slideshows.

7.You can set different times for scheduled slideshows on the weekends in the same manner.

8.When you are happy with the settings, press the Exit button to save them and return to the Calendar/Clock screen. Press EXIT again to return to HOME screen

Turn Scheduled Slideshows On or Off

After you set create slideshow schedules, you need to turn slideshow scheduling on to use the schedules. With the Calendar/Clock displayed, press the SCHED SLIDE button on PanTouch Sensor area.

Network Photo

This feature provides access to Google’s Picasa photo site to view, browse and download photos to the internal memory of the Digital Picture Frame (DPF). It involves three layers of features: network connection layer for connection to the home wireless network, service connection layer for connection to Picasa, user application layer that provides photo preview by thumbnail, single photo full screen view, slideshow and photo download to the internal memory.

Setting up your DPF to stream photo’s from Picasa requires 2 steps.

1)Setting up your Wireless Network User ID and Password on the DPF

2)Setting up your Picasa User ID and Password on the DPF.

Step 1: Setting up your Wireless Network User ID and Password on the DPF.

c.Insert your compatible wireless USB adaptor (PANWF01) to the USB host port and then turn on the DPF. Please check our website for the comparable USB wireless adapters. http://www.pandigital.net

d.From Home screen, select the “Network Photo” icon and press ENTER.

e.Select the “Search For Network” option and press ENTER.

f.Select your Network ID and press ENTER

g.Enter your network password and then the “Done” key.

h.When your MAC and IP address appears on the screen, the setup is complete, press BACK twice to return to the “PanTouch Menu Home”

21

Image 11
Contents Digital Photo Frame Table of Contents Introduction Important Safety PrecautionsSetting Up the Digital Photo Frame Cleaning the Digital Photo FrameUse the PanTouch Buttons Using the PanTouch Buttons and Remote ControlUse the Remote Control Install and Replace the Remote Control BatteryClose the tray Using the Digital Photo Frame’s ScreensHome Screen Thumbnails ScreenRotate a Photo on the Full Screen Starting and Customizing SlideshowsPlay a Slideshow of All Photos Display a Single Photo on the Full ScreenPlay a Slideshow of Selected Photos Only Connecting Speakers to the Photo FrameControl the Volume Watching a VideoCopy a Single Photo Photo Copy Method OptionsCopying Photos from a Memory Card to Built-in Memory Changing the Photo Copy MethodDelete Several or All Photos in the Built-in Memory Deleting Photos from the Built-in MemoryDelete the Displayed Photo Delete a Single Photo on the Thumbnails ScreenDisplaying a Clock with a Calendar and a Slideshow Bluetooth SettingSetting Viewing Options Create a Schedule for Playing Slideshows Set the AlarmNetwork Photo Set the Internal ClockConnect to a Windows Computer Setting up your Picasa User ID and Password on the DPFCopying Files from a Computer or Flash Drive Changing the Decorative FrameConnect a USB Flash Drive PanTouch Slideshow Setup MenuDisconnect the Digital Photo Frame from the Computer Limited Warranty Frequently Asked QuestionsFCC Part 15 Information FCC StatementCadre Photo Numérique Changement de cadre décoratif Installation et remplacement de la pile de la télécommandeNettoyage du Cadre pour photo numérique Changement de méthode de copie de photosNettoyage du Cadre pour photo numérique Mesures de sécurité importantesUtilisation des touches PanTouch Configuration du Cadre pour photo numériqueUtilisation des Touches PanTouch et de la télécommande Contenu de la boîteTouche Action Utilisation de la télécommandeInstallation et remplacement de la pile de la télécommande Utilisation des écrans du Cadre pour photo numériqueAffichage d’une seule photo sur plein écran Écran d’ACCUEILÉcran des vignettes Démarrage et personnalisation des diaporamas Choix de méthodes de copie de photos Contrôle du volumeBranchement de haut-parleurs au Cadre pour photo Visionnement d’une vidéoCopie de plusieurs photos Copie d’une seule photoSuppression d’une seule photo sur l’écran des vignettes Suppression de photos à partir de la mémoire intégréeSuppression de la photo affichée Affichage d’une horloge avec un calendrier et un diaporama Configuration des options de visualisationConfiguration de l’horloge interne Ouvrir ou Fermer la programmation des diaporamas Configuration de l’alarmeRéseau de photos Création d’une programmation pour les diaporamasBranchement à un ordinateur Windows Changement de cadre décoratifCopie de fichiers à partir d’un ordinateur ou d’une clé Branchement d’une clé USB Débranchement du Cadre pour photo numérique de l’ordinateurFoire aux questions Menu de configuration PanTouch DiaporamaGarantie limitée Informations portant sur la du FCC Énoncé du FCC